User Manual

ENGLISH
Aurora Series: Geng Started
DVR User’s Manual
23
If you are using PPPoE connecon,
select PPPoE tab. Specify User name
and Password.
See “LAN” on page 49 for further
more informaon.
DDNS & Port Setup
To enable remote live view the DVR
via MyKguard, you need to enable
the funcon rst prior accessing
MyKguard (hp://www.mykguard.
com).
Note:
For accessing MyKguard, it is
advised to use Internet Explorer 8
or above.
Switch: Select Enable to enable this
funcon.
DDNS (Dynamic DNS) is a service that
registers a domain name and the
oang IP address with a DDNS server
so that the domain name can be
routed to the IP address even if the IP
is changed in a dynamic IP system.
DDNS: Select Enable to enable this
funcon.
Server: Select the DDNS server.
Host Name: Enter the domain name
you registered on DDNS server.
Note:
If the registered domain name is 123ABC.KGUARD.ORG, the IP address you type on IE or Safari when you browse
Web Client is hp://123ABC.KGUARD.ORG.
User name: Enter the DDNS user name.
Password: Enter the DDNS password.