User Manual

ENGLISH
Aurora Series: Conguring DVR Sengs
DVR User’s Manual
33
Basic Menu
System Setup
Device name: Enter the desired
name for the DVR. The name can be
composed of alphanumeric characters
and is used to idenfy this device in
your list of acvated DDNS accounts.
Device ID: Enter the desired ID for
the DVR. The device ID, idenfying
the DVR, can only be composed of
numbers and cannot be the same with
other IDs when mulple DVRs are
connected in the same network.
Video format: Choose between NTSC and PAL, depending on your geographical locaon.
Note:
NTSC - for the USA, Canada, Mexico, Japan, Korea and some other regions.
PAL - for UK, Europe, Australia and some other areas.
VGA resoluon: Select how many pixels the DVR will output. It is recommended to use as high resoluon as possible
that matches with your monitor’s highest resoluon.
Language: Select the language you wish the menu items to be displayed in.
Logout me: Select the me period for menu me out.
Startup wizard: The Setup Wizard will run automacally the rst me you start the DVR. The wizard will guide you
through all the basic sengs you need to congure for geng your DVR start up and funconing.
Note:
To prevent the Wizard Setup screen appear every me the system reboots, set the seng to O.
Date/Time Setup
Date/Time
Date/Time: All video footages are
stored on the HDD based on their
me stamps. Make sure you set the
correct system date and me.
Note:
You can click on on-screen
calendar ( ) or type in the
current date manually.
Date format: Select the format you
prefer the date to be displayed.
Time format: Select the format you
wish the me to be displayed. The
opons are 24 hours or 12 hours.