User Manual

ENGLISH
Aurora Series: Conguring DVR Sengs
34
DVR User’s Manual
Time zone: Select the me zone in your locaon.
Note:
In the USA, EST (Eastern Standard Time) is GMT -5:00, where PST (Pacic Standard Time) is GMT -8:00.
The UK is GMT +0:00, and the East Coast of Australia is GMT +10:00.
Auto update: Click to automacally set the date and me according to the network.
Time Server: Choose the me server that will keep track of DST sengs (see in the following secon).
Note:
If you choose to use the Time Server, make sure your DVR has a constant Internet connecon.
DST (Daylight Saving Time)
You can allow the DVR to
automacally update its internal clock
when daylight saving starts and ends.
Enable: Check this opon to allow the
DVR automacally adjust the me for
DST. To disable, uncheck this opon.
Mode: Select the DST mode.
• Week: Enter the Start Time
and End Time informaon by
selecng the starng/ending
month, week, day, and entering
the starng/ending me.
• Date: Enter the Start Time
and End Time informaon by
entering the starng/ending
date and me.
Oset: Select the amount of me to oset for DST.
From/To: Enter the Start Time and End Time informaon when the DST begins and ends at your locaon.
Display Setup
Display
Name: Enter your desired channel
tle to be displayed on the screen.
Mask: You can create and shape a
privacy zone (mask) which hides part
of the image on the selected channel.
To do so, select Sengs and enter the
Mask submenu. See “Privacy Zone
Sengs” on page 35.
Color: Adjust image hue, brightness,
contrast, and saturaon sengs.
Select Sengs enter the Color
submenu. See “Color Sengs” on
page 35.