User Manual
ENGLISH
Aurora Series: Conguring DVR Sengs
DVR User’s Manual
39
Note:
If the record mode seng is set to 960H, it is recommended to use a 600 TVL or higher resoluon camera.
Frame rate: Select how many images per second the DVR will record. According to the standard, “Real me” is 30fps
(NTSC) or 25fps (PAL). With the resoluon WD1 (960H) the recommended frame rate with 8 channels is 8fps, and
with 16 channel is 6fps.
Quality: Select the video quality. Best means the lowest compression rate but larger video le size; Normal means
the highest compression rate and smaller video le size.
Copy CH/To CH: Copy the current sengs to all channels or one specic channel. Click the arrow to select an opon
and then click Copy. If you use the Copy All funcon with resoluons HD1, D1, WHD1, the resoluons are copied
only to channels CH1 ~ CH4.
Aer all sengs are complete, click Apply.
Schedule
The schedule that is displayed on-
screen applies only to one channel at
a me.
There are three types of recording
modes to choose from.
Manual: The recording is done
manually. To start recording, you need
to click on recording buon( ) on
Task Bar or press the Record buon
on remote control. See “Remote
Control” on page 9 or “Task Bar”
on page 26.
Normal: The DVR will connuously record for any period where Normal mode is selected.
Note:
Make sure the space on hard disk is sucient when using constant recording.
Alarm: The DVR will only record when an alarm is detected. To know more on alarm sengs and events, please see
“Alarm Setup” on page 42.
CH: Select the channel you want to set the schedule.
Copy CH/To CH: Copy the current sengs to all channels or one specic channel. Click the arrow to select an opon
and then click Copy.
Aer all sengs are complete, click Apply.