User Manual

ENGLISH
Aurora Series: Conguring DVR Sengs
DVR User’s Manual
41
• Conguring Other Users
In Basic user menu you can specify
the user name, password, MAC
address and allow the binding client
MAC or not.
User name: Select a name for the
user you want to dene. The best
usernames are short and relevant
to the speciality of the user they’re
intended for.
Password: Can be composed of
numbers from 0 to 9 and leers. The
maximum length is 16 characters.
Retype password: Must exactly match
with the password for the specic
user.
User type: The Administrator type is binded directly to the administrator account. The user type for all other users is
Normal.
Binding Client MAC (Media Access Control): When this feature is enabled then the DVR can authencate the client
PC by the MAC address in combinion with the specic DVR user name.
For example, the user of the DVR is “kguard” and the binding MAC address is: 00:11:22:33:44:55. Therefore only
the PC with MAC address 00:11:22:33:44:55 and logged in user “kguard” can remotely connect to the DVR via Web
Client program.
MAC: Client device’s MAC address allows the DVR to idenfy the connecng device during the remote session. The
MAC address should be entered as a 12-digit hexadecimal code, separated by colons. Example: 00:11:22:33:44:55.
Click Apply to save the sengs.
• Eding Account Informaon
Double-click the desired account that
you want to edit. Click the respecve
item and modify the necessary
sengs.
Click Apply to save the sengs.