User Manual

ENGLISH
Aurora Series: Conguring DVR Sengs
46
DVR User’s Manual
• Sensor Schedule Setup
In Schedule, click Sengs and double-
click the me slot to set the schedule.
Start me/End me: Enter the Start
me and End me informaon when
the sensor detecon begins and ends.
To add addional sensor detecon
schedule, click Add.
To disable sensor detecon at the
scheduled me, check the desired
schedule box that you want to delete
and click Delete.
Copy/To: Copy the current sengs to other days. Click the arrow to select an opon and then click Copy.
Click OK to save the sengs.
• Sensor Trigger Sengs
In Trigger, click Sengs to congure
what acons are taken when the
sensor detects an abnormal situaon.
Record: Check the box to select the
channel(s) to record when the sensor
is triggered.
Snapshot: Check the box to select the
channel(s) to take a snapshot when
the sensor is triggered.
Send E-MAIL: Check to enable e-mail
alarm nocaon. If the funcon is
enabled, the system will send the
alarm messages / snapshots (snapshot
opon must be enabled rst) to the
specied e-mail address.