User Manual

ENGLISH
Aurora Series: Conguring DVR Sengs
50
DVR User’s Manual
PPPoE
Select if you are using PPPoE
connecon. With PPPoE (Point-to-
Point Protocol over Ethernet), your
DVR is most likely connected to a DSL
modem, and your ISP has supplied
you with an authencaon user name
and password to the Internet.
PPPoE: Select Enable to use PPPoE
network connecon.
User name: Enter the user name that
your ISP has supplied you.
Password: Enter the password that
your ISP has supplied you.
Aer all sengs are complete, click Apply.
Port
Specify the Media Port and Web Port
numbers.
Media port: Is used to access your
DVR via portable device. The default
port number is 9000.
Web port: Is used to access your DVR
from your local LAN or the Internet
using a laptop or PC. The default port
number is 80.
Aer all sengs are complete, click
Apply.
Note:
If you cannot use the either of the two default ports, 80 or 9000, the specied port may be occupied by other
programs or it is being blocked by your service provider. Enter other port number. In this case, you need to add
the port number aer the IP address. For example, if you set the Web port as 85, you need to enter the IP address
as “192.168.3.103:85”.