User Manual

ENGLISH
Aurora Series: Conguring DVR Sengs
DVR User’s Manual
53
Sending interval: Select an e-mail sending interval.
Mail server(SMTP): Enter the SMTP Server of the sending e-mail server. If you do not know the SMTP mail server
address, please consult with the e-mail service provider or check the informaon on their web page.
Port: Enter the SMTP port of the sending e-mail server.
Note:
By default, the SMTP port is 25 for e-mail without SSL vericaon. For Gmail server or for e-mail that needs SSL
Vericaon, the SMTP port is 465, by default. Check with your ISP for the correct seng.
Connecon security: If your e-mail server needs the SSL (Secure Sockets Layer) or TLS (Transport Layer Security)
vericaon, select SSL/TLS. Check with your e-mail service provider for the applicable seng.
User name: Enter the e-mail address of the sender.
Password: Enter the password of the sender’s e-mail.
To: Enter the e-mail address where the nocaon e-mail is to be sent.
CC: Enter the e-mail address that you want to copy to. You can set up to 4 e-mail addresses.
Test: Click to send a test e-mail to the recipient’s e-mail address.
Aer all sengs are complete, click Apply.
UPnP
UPnP: (Universal Plug and Play) is an
universal protocol for widespread
plug-and-play devices to ease the
network implementaon. Many
routers that support UPnP do not
come with the feature enabled by
default. If this funcon does not work,
be sure to check if UPnP seng is
enabled.
Enable: Select Enable to acvate the
UPnP funcon.
Aer all sengs are complete, click
Apply.