User Manual
Table Of Contents
- About this Manual
- Chapter 1: Product Overview
- Chapter 2: Installation
- Chapter 3: Getting Started
- Chapter 4: Using the DVR
- Chapter 5: KGUARD Web Client
- 5.1 Login
- 5.2 The Interface
- 5.3 Live Viewing
- 5.4 Searching and Playing Recorded Videos
- 5.5 Remote Settings
- 5.6 Local Settings
- Chapter 6: Using KView Series Software
- Chapter 7: Troubleshooting & FAQ
- Appendix: Specifications
ENGLISH
Chapter 5: KGUARD Web Client
100
DVR User’s Manual
4 Set the Protocol, Baudrate, Data Bits, Stop Bits, and Parity.
Note:
Check the PTZ camera specicaons for the correct sengs.
5 Enable or disable Cruise.
6 Set the Address.
7 Aer all sengs are complete, click Save.
« TIP »
• To apply the same recording sengs to other channels, click Copy. See “Copying Sengs To Other Channels”
on page 85.
• To cancel any modicaons and retain the exisng sengs, click Refresh.
5.5.7 Managing System Sengs
On the System Setup menu, you can modify the me zone and view the language used on the DVR and its signal
source.
General Setup
1 On the Main Menu, click Remote Seng.
2 On the le panel, click System > General. The General screen appears.