User Manual
Table Of Contents
- About this Manual
- Chapter 1: Product Overview
- Chapter 2: Installation
- Chapter 3: Getting Started
- Chapter 4: Using the DVR
- Chapter 5: KGUARD Web Client
- 5.1 Login
- 5.2 The Interface
- 5.3 Live Viewing
- 5.4 Searching and Playing Recorded Videos
- 5.5 Remote Settings
- 5.6 Local Settings
- Chapter 6: Using KView Series Software
- Chapter 7: Troubleshooting & FAQ
- Appendix: Specifications
ENGLISH
Chapter 4: Using the DVR
68
DVR User’s Manual
4 Click Edit.
5 If you want to modify the user name, enter desired name in User Name.
6 Click the Password box to enter the password (see “3.6.2 Virtual Keyboard” on page 30 for details on using the
virtual keyboard).
Note:
The password must be 6 numbers in length.
7 In Conrm, enter the password again.
8 Aer all sengs are complete, click Apply.
9 When data saving is complete, click OK.
Conguring Other Users
Only the administrator can enable or disable a user account.
1 In preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Main Menu > SYSTEM, select the Users tab.
3 Click the check box of a user account. A √ icon appears.
4 Click Edit.
5 Enter the User Name (see “3.6.2 Virtual Keyboard” on page 30 for details on using the virtual keyboard).
6 To prompt for password, select Enable in Password Status.
7 Enter the password in Password and Conrm.
8 Aer all sengs are complete, click Apply.
9 When data saving is complete, click OK.