User Manual

ENGLISH
Chapter 4: Using the DVR
DVR User’s Manual
75
4.8.2 Events Sengs
The Events page allows you to dene the type of events for the DVR to issue an alarm.
1 In preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Main Menu > ADVANCED, select the Events tab.
3 Modify the necessary sengs.
Menu Item Descripon
Event Type Select the event type. Opons are:
• Disk Full: When HDD is full.
• Disk Error: If HDD is not detected properly.
• Video Loss: If camera is not detected properly.
Enable Select Enable to issue a nocaon when the event type occurs.
AlarmOut If an alarm device is connected, check the box to make the device sound the alarm when
the event occurs.
Dwell Time Select the alarm duraon (10S/20S/40S/60S).
Show
Message
Check the box to display a message on the screen when the event occurs.
Buzzer Set the buzzer duraon when the event occurs ( O/10 S/20 S/40 S/60 S).
To disable buzzer, select O.
Send Email Check to enable email alarm nocaon. If the funcon is enabled, the system will send
the alarm to the specied email address. See “4.4.3 Email Sengs” on page 54.
4 Aer all sengs are complete, click Apply.
5 A warning message appears, click OK to conrm.
6 When data saving is complete, click OK.