User Manual
Table Of Contents
- About this Manual
- Quick Setup Guide
- Understanding the Live Viewing Screen
- Basic DVR Operation
- Accessibility Features
- Operating the DVR
- Main Menu
- Display: Live
- Display: Output
- Display: Privacy Zone
- Record: REC Para
- Record: Schedule
- Record: Record Setup
- Search: Record Search
- Search: Event Search
- Search: Log
- Network: Network
- Network: Remote Stream
- Network: Email
- Network: DDNS
- Alarm: Motion
- Device: HDD
- Device: PTZ
- Device: Cloud Storage
- System: General
- System: Users
- System: Info
- Advanced: Maintain
- Remote Access Via Web Client
- Appendix
ENGLISH
Easy Link PRO Series: Accessibility Features
46
DVR User’s Manual
Advanced E-mail Setup
If you cannot receive the acvaon e-mail or do not want to use the KGUARD’s SMTP server (default), you can
congure the parameters of your SMTP server here.
NOTE: In order to get the acvaon e-mail, make sure you have lled in the Receiver Email in step “How to Congure
the Cloud Storage Sengs for Dropbox” on page 44.
Aer the conguraon is done, you can test the sengs by clicking on Email Test buon.
• Email: Enable advanced e-mail setup.
• SSL: Enable if your e-mail server requires the SSL vericaon. If you are not sure, please consult your e-mail
service provider. For example, if you are using Gmail then this opon should be enabled.
• SMTP Port: Enter the SMTP port of your e-mail server. For example, if you are using Gmail, the SMTP port is 465.
• SMTP Server: Enter the SMTP server address of your e-mail.
• Sender Email: Enter the e-mail address of your e-mail.This e-mail address is used by the DVR only for sending you
the acvaon e-mail for asking your acceptance to link the DVR to the Dropbox.
• Sender PWD: Enter the password of your e-mail.
Aer all sengs are complete, click Apply. For tesng the sengs, click Email Test.