Owner manual

KGUARDKViewCenterSoftwareUserManual
www.kguardsecurity.com
【Chapter 2: DVR CAM Setting】
2.1. DVR CAM Setup
Step 1. Switch to “Preview Mode” on control panel and change the menu
to “Configuration Mode” , “Device Configuration” and
the DVR Device edit window will display.
Step 2. “Add DVR” button, and key in the name、IP Address (correct IP address)、user
account、Password of Stand-alone DVR, and “OK” button.
*For example: If the IP address and Port of standalone DVR is 192.168.3.132, port is 09000, you
need to key in IP address 192.168.3.132, port 9000,herein.

Allrightsreserved
12