Manual
ENGLISH
Chapter 3: Geng Started
28
DVR User’s Manual
3.4.4 Rotate View
With this funcon, the system will automacally rotate the display through all the channels and split window display.
To enable rotate view:
1 In the preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Start Rotate.
The rotang display starts. By default, each display switches at 5 seconds interval. You can change the switch rotate
me interval in Display menu (see “4.1 Seng the Display” on page 32).
An example of the screen display rotaon, as follows:
Full screen
(First channel)
Full screen
(Second channel)
8-window display 4-window display
Note:
The displayed screens vary depending on the available channels.
To disable rotate view:
1 Right-click on the mouse to display the Pop-up menu.
2 Select Stop Rotate.
Note:
Rotate funcon is not available when View Setup is enabled (see “4.1 Seng the Display” on page 32).