Owner's manual
ENGLISH
Chapter 3: Geng Started
38
DVR User’s Manual
3.7 Manual Recording
With this funcon, you can manually record the video. The system will connuously record the video unl you
manually stop the recording.
To enable manual recording:
1 In the preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Manual Record.
The video recording starts.
To stop the manual recording:
1 Right-click on the mouse to display the Pop-up menu.
2 Select Stop Manual Record.
The video recording stops.
Note:
This funcon is available only if record mode is set to schedule. See “4.1.2 Recording Setup” on page 40.
3.8 Switching Video Output
With this funcon, you can switch the GUI output between the
two monitors (VGA or BNC). By default, the video output connecon
is set to VGA.
To switch to BNC output:
1 In the preview mode, right-click on the mouse to display the Pop-up menu.
2 Select GUI on BNC.