Owner's manual

ENGLISH
Chapter 4: Using the DVR
42
DVR User’s Manual
Note:
If the frame rate which you set is over the system limitaon, a message is displayed on the screen. For example, as
below:
4.2 Seng the Network
To enable remote monitoring, recording, playing, or conguring the seng, you need to congure the network sengs
rst. There are ve types of network setup: DHCP, PPPoE, Stac IP, DDNS, Port Forwarding. Consult your Internet
Service Provider (ISP) to determine the type of network connecon you are using and the required parameters to
complete the setup.
4.2.1 DHCP
The Dynamic Host Conguraon Protocol (DHCP) is an auto conguraon protocol used on IP networks.
1 In preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Main Menu > NETWORK.
3 On Type, select DHCP.
4 Specify the Media Port and WEB Port numbers.
5 Aer all sengs are complete, click Apply.
6 When data saving is complete, click OK.