Owner's manual
ENGLISH
Chapter 4: Using the DVR
DVR User’s Manual
55
Note:
For details on supported mobiles, see the “DVR SHA Series Support Manual” in the enclosed CD.
4.4.5 Seng Moon Detecon
For added security, enable the moon detecon feature. When moon is detected on a selected area, the DVR issues
an alarm nocaon.
To congure moon detecon, do the following:
1 In preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Main Menu > DEVICE > MOTION.
3 In Channel, select the channel to acvate moon detecon.
4 In Moon Detecon, select Enable.
5 In Sensivity, select the moon sensivity from 1 to 8, wherein in 1 is the least sensive and 8 the most sensive.
6 Click Setup.
7 A grid screen with a green cursor appears. By default, the whole screen is marked for moon detecon (red block).
If you want to disable moon detecon on an area, click the grid cursor and then drag the mouse to highlight the
scope to unmark the area (transparent block) for moon detecon.
8 To close the grid screen, click the right mouse buon.
9 Aer all sengs are complete, click Apply.
10 When data saving is complete, click OK.
When moon detecon is enabled on a channel, the channel screen displays the moon detecon icon
M
.
« TIP »
To copy the current sengs to other channels, select the channel(s) in Copy To and then click Copy.