Owner's manual

ENGLISH
Chapter 5: KGuard Web Client
DVR Users Manual
79
Seng Up with PPPoE
If your network uses the Point-to-Point Protocol over Ethernet (PPPoE), do the following:
1 On the Main Menu, click Remote Seng.
2 On the le panel, click Network > PPPoE. The PPPoE screen appears.
3 Enable PPPoE.
4 Enter the User Name and Password.
Note:
Obtain these informaon from your network administrator or your Internet Service Provider (ISP).
5 To save, click Apply at the boom of the screen.
« TIP »
To revert to default sengs, click Default at the boom of the screen.
To cancel any modicaons and retain the exisng sengs, click Refresh at the boom of the screen.
Seng Up DDNS
DDNS (Dynamic DNS) is a service that registers a domain name and the oang IP address with a DDNS server so that
the domain name can be routed to the IP address even if the IP is changed in a dynamic IP system.
To use this feature, you must have a DDNS account. Obtain the informaon from your Internet Service Provider (ISP) or
create a free DDNS account with KGuard.org server, visit the website hp://www.kguard.org.
To setup DDNS, do the following:
1 On the Main Menu, click Remote Seng.
2 On the le panel, click Network > DDNS. The DDNS screen appears.
3 Enable DDNS.
4 On Service, select the DDNS server.