Owner manual
Table Of Contents
- About this Manual
- Chapter 1: Product Overview
- Chapter 2: Installation
- Chapter 3: Getting Started
- Chapter 4: Using the DVR
- Chapter 5: KGuard Web Client
- 5.1 Login
- 5.2 The Interface
- 5.3 Live Viewing
- 5.4 Searching and Playing Recorded Videos
- 5.5 Remote Settings
- 5.6 Local Settings
- Chapter 6: Using KView Series Software
- Chapter 7: Troubleshooting & FAQ
- Appendix: Specifications
ENGLISH
Chapter 4: Using the DVR
32
DVR User’s Manual
4 Aer all sengs are complete, click Apply.
5 When data saving is complete, click OK.
Schedule Recording
1 In preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Main Menu > RECORD.
3 On Mode, select Schedule.
4 Click Schedule Setup.
5 Select the channel that you want to record, and specify the record mode (Alarm/Normal/No Record).
6 Click on the me slot on the desired day.
7 Aer all sengs are complete, click Apply.
« TIP »
To copy the current sengs to other channels, select the day and specify the channel, then click Copy.
8 When data saving is complete, click OK.
Frame Rate Setup
1 In preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Main Menu > RECORD.
3 On Frame rate, select Manual.
4 Click Frame Rate Setup.
5 Select the channel and adjust the necessary
sengs.
6 Aer all sengs are complete, click Apply.
7 When data saving is complete, click OK.