Owner manual
Table Of Contents
- About this Manual
- Chapter 1: Product Overview
- Chapter 2: Installation
- Chapter 3: Getting Started
- Chapter 4: Using the DVR
- Chapter 5: KGuard Web Client
- 5.1 Login
- 5.2 The Interface
- 5.3 Live Viewing
- 5.4 Searching and Playing Recorded Videos
- 5.5 Remote Settings
- 5.6 Local Settings
- Chapter 6: Using KView Series Software
- Chapter 7: Troubleshooting & FAQ
- Appendix: Specifications
ENGLISH
Chapter 4: Using the DVR
DVR User’s Manual
45
5 Aer all sengs are complete, click Apply.
6 When data saving is complete, click OK.
Note:
The PTZ camera can only be acvated when a connected channel with the PTZ camera is selected.
4.4.4 Seng Up Mobile Devices
To remotely access the DVR via mobile devices, be sure that the DVR network connecon is properly congured before
proceeding with the mobile devices setup.
To congure the mobile devices, do the following:
1 In preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Main Menu > DEVICE > MOBILE.
3 Set the User Name and User Password which you have set for the DVR (see “3.3.2 Virtual Keyboard” on page 21
for details on using the virtual keyboard).
4 Enter the Server Port. The seng range is between 1024 and 65535.
Note:
• The user name and password cannot be le empty.
• To forward a server port to the router, see “4.2.4 Port Forwarding” on page 35.
5 Aer all sengs are complete, click Apply.
6 When data saving is complete, click OK.