Owner manual
Table Of Contents
- About this Manual
- Chapter 1: Product Overview
- Chapter 2: Installation
- Chapter 3: Getting Started
- Chapter 4: Using the DVR
- Chapter 5: KGuard Web Client
- 5.1 Login
- 5.2 The Interface
- 5.3 Live Viewing
- 5.4 Searching and Playing Recorded Videos
- 5.5 Remote Settings
- 5.6 Local Settings
- Chapter 6: Using KView Series Software
- Chapter 7: Troubleshooting & FAQ
- Appendix: Specifications
ENGLISH
Chapter 5: KGuard Web Client
DVR User’s Manual
69
Seng Up with PPPoE
If your network uses the Point-to-Point Protocol over Ethernet (PPPoE), do the following:
1 On the Main Menu, click Remote Seng.
2 On the le panel, click Network > PPPoE. The PPPoE screen appears.
3 Enable PPPoE.
4 Enter the User Name and Password.
Note:
Obtain these informaon from your network administrator or your Internet Service Provider (ISP).
5 To save, click Apply at the boom of the screen.
« TIP »
• To revert to default sengs, click Default at the boom of the screen.
• To cancel any modicaons and retain the exisng sengs, click Refresh at the boom of the screen.
Seng Up DDNS
DDNS (Dynamic DNS) is a service that registers a domain name and the oang IP address with a DDNS server so that
the domain name can be routed to the IP address even if the IP is changed in a dynamic IP system.
To use this feature, you must have a DDNS account. Obtain the informaon from your Internet Service Provider (ISP) or
create a free DDNS account with KGuard.org server, visit hp://www.kguard.org.
To setup DDNS, do the following:
1 On the Main Menu, click Remote Seng.
2 On the le panel, click Network > DDNS. The DDNS screen appears.
3 Enable DDNS.
4 On Service, select the DDNS server.