User Manual

ENGLISH
Chapter 4: Using the DVR
DVR User’s Manual
41
4 Select an overwrite interval opons (Auto/1 Hour/3 Hours/1 Day/7 Days/30 Days/90 Days/Close).
Note:
If the overwrite is set to Close, the recording will stop once the hard disk drive is full.
5 Aer all sengs are complete, click Apply.
6 When data saving is complete, click OK.
Formang HDD
Aer a new hard disk drive is properly installed in the DVR, the system automacally detects the HDD and prompts for
disk formang.
To format the hard disk drive, do the following:
1 In preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Main Menu > DEVICE > HDD.
3 Select the hard disk drive that you want to format.
4 Click Format HDD.
5 An “All data will be deleted aer formang” warning message appears on the screen. Click OK to proceed.
6 When the formang process is complete, click OK.
Formang USB drive
To format the USB disk drive, do the following:
1 Plug a USB device into the USB connector at the front panel or the rear panel of the device.
2 In preview mode, right-click on the mouse to display the Pop-up menu.
3 Select Main Menu > DEVICE > HDD.
4 Click Format USB.
5 An “All data will be deleted aer formaed” warning message appears on the screen. Click OK to proceed.
6 When the formang process is complete, click OK.
Note:
Do not remove the USB device while drive formang is in progress.