User`s manual

10
WI-FI Network Camera User’s Manual
Making Connections
10. Click on the router name and modify the following.
• Check Using Wireless LAN opon.
• Enter the wireless router’s password in Key eld.
11. Click Save.
12. Disconnect the RJ45 Ethernet cable from the camera.
DC IN1234WPS RESET
Internet
13. Disconnect and connect the power adapter, to restart the camera.
14. When the red status LED (see “Product Overview” on page 5) turns o, wait for 10 seconds unl the
Camera boots up and starts rotang.
NOTE: When the red status LED starts blinking with a second interval, it means the wireless network
connecon is successful.
15. Download KviewQR applicaon and view the live view on your mobile devices. See “Connect to Camera” on
page 16.