User`s manual

14
WI-FI Network Camera User’s Manual
Making Connections
5. On Network and Sharing Center click Local Area Connecon Status > Details and write down the network
parameters (IP Address, Subnet Mask, Gateway, and DNS Servers).
6. Insert the CD (supplied) to your PC’s CD drive. Click on Search IP.
7. The program lists the camera by IP address. Right-click on the camera’s IP address eld and select
Network Conguraon.
8. In Network Conguraon menu, do the following modicaons:
• Uncheck the DHCP Server opon.
• Assign the camera a new IP address by changing the last three digits of the current IP address (0 ~ 255).
• Enter the Subnet Mask, Gateway, and DNS server address that you just wrote down in Step 5.
NOTE: You need to enter the DNS server address if you plan to use the camera’s web client e-mail service
for receiving moon detecon/alarm nocaons. Verify DNS server address with your ISP if you cannot
nd it on Step 5.