User`s manual

16
WI-FI Network Camera User’s Manual
Making Connections
15. On Network screen, do the following modicaons:
• Depending on the Internet connecon you are using, select Stac Address or PPPoE as the network type.
• Do the necessary modicaons to the network parameters.
16. Click Save.
17. Disconnect and connect the power adapter, to restart the camera.
18. When the red status LED (see “Product Overview” on page 5) turns o, wait for 10 seconds unl the
Camera boots up and starts rotang.
NOTE: When the red status LED starts blinking with a second interval, it means the wired network connecon
is successful.
Connect to Camera