User`s manual

WI-FI Network Camera User’s Manual
25
Web Client
Right Panel Control
You can use the Panel Control to access the PTZ Control panel and customize the display sengs.
Click the direcon arrow to select
the direcon of the PTZ camera.
Go to a specic preset point.
Set a preset point.
To set a preset point:
1. Click the direcon arrow to
select the direcon of the
camera.
2. Click and select a preset
point number.
Start/stop cruise.
Start vercal patrol
(camera moves up and down).
Stop vercal patrol.
Start horizontal patrol
(camera moves le and right).
Stop horizontal patrol.
Enable the I/O output.
Disable the I/O output.
Adjust the Camera speed.
Adjust the brightness level of the
display.
Adjust the contrast level of the
display.
Adjust the hue level of the display.
Adjust the saturaon level of the
display.
Select the on-screen display color.
Select the video format of your
locaon or select Outdoor if you
are using the Camera in a room
with sunlight.
Check the box to see the mirror image
(le and right sides are reversed).
Check the box to see the reverse image
(image is ipped vercally).