User`s manual
34
WI-FI Network Camera User’s Manual
Web Client
Name: Enter the cruise name.
Status: Check to enable the current cruise mode.
Serial Number: Check the box to acvate the selected preset mode.
Preset: Select the preset point that you have set with Right Panel Control. See “Right Panel Control” on page 25.
Residence Time: Specify the residence me for each preset point.
Speed: Specify the moving speed between two preset points.
Indicator
Congure the LED indicator behavior when the Camera is connected to the network.
Indicator Mode: Select the desired indicator seng.
• Blink when network connected; o when no connecon: The LED indicator only blinks when
the Camera is connected to the network.
• Blink when network connected; Slow blink when no connecon: The LED indicator blinks
rapidly when the Camera is connected to the network. Otherwise, the LED indicator blinks
slowly when the Camera is disconnected from the network.
• Always o: The LED indicator is always o when the Camera is connected to the network.
Users
Change the password and authorize users and set the access rights in using the Camera.
To change the administrator password, enter the new password in Password and click Save.