Manualshelf

User`s manual

ManualsBrandsKguard ManualsSecurity CamerasQRT-301 PanTilt IP camera
12345678910
8
WI-FI Network Camera User’s Manual
Making Connections
4. When the red status LED (see “Product Overview” on page 5) turns o, wait for 10 seconds unl the
Camera boots up and starts rotang.
NOTE: When the red status LED starts blinking with a second interval, it means the wireless network
connecon is successful.
5. Download KviewQR applicaon and view the live view on your mobile devices. See “Connect to Camera” on
page 16.
Wireless Router Without WPS Funcon
If your wireless router does not support WPS funcon, perform the following to establish a connecon from the
camera to the wireless router:
1. Connect the camera to the power socket, using the power adapter.
2. Connect one end of the RJ45 cable (supplied) to the camera and the other end to the wireless router.
DC IN1234WPS RESET
Internet
3. Make sure your camera and computer are connected to the same router.
DC IN1234WPS RESET
Internet