User manual

OOPERATING INSTRUCTIONS FOR THE SAFETY FIRST.-PERSONAL-ALARM AT THE KEYCHAIN /
ITEM-NUMBER S54026
Thank you for buying the SAFETY FIRST.-Personal-Alarm at the keychain. You have decided for a very
high quality Personal-Alarm, which in case of an attack or robbery activates a high output, piercing alarm
that can put the agressor to flight. The SAFETY FIRST.-Personal-Alarm at the keychain is very simple to
use. Please take your time and study the simple instructions as follows:
1. Introduction:
High quality batteries are already installed in your Personal-Alarm, in so far the unit can be used
immediately as follows: Simply fix your Personal-Alarm for example at your bunch of keys. In case of an
emergency, pull the keyring in a way, that the small metallpin sticking into the Personal-Alarm comes out
and the very loud, piercing alarm does start immediately. When sticking the pin back into the unit the
alarm will stopp.
Please practice a function test of the Personal-Alarm. Before making the test, in any way please protect
your ears to avoid damage of the ears. Over that please cover the siren at the front of the unit. After that
activate the alarm by pulling the keyring. As soon as the alarm starts please put back the metallpin into
your Peronal-Alarm for stopping the loud alarm immediately. After you have practiced the function of your
new Personal-Alarm and after you have found out that it does work unobjectionable you can use your new
unit at any time.
In case you are using your Personal-Alarm after a long period where you have not used the unit, please
first of all practice a function test like it is described above to ensure that your unit is still working and really
can help in case of an emergency.
2. Function LED-Torch:
The LED-Torch, for example convenient to use for locks in the darkness, is simply activated by pressing
the button lokated at the lower position of the front of the Personal-Alarm. The LED is shinning as long as
the LED-button is pressed and hold.
3. Replacing the batteries:
In case the alarm sound is not as loud as before or in case you can not hear the alarm or the LED of the
torch is not shinning or is not as bright shinning as before, please replace the batteries. Open the batteries
compartment by removing the two screws on the back of the Personal-Alarm housing with a small
srewdriver. Gently apart the back cover from the front of the housing of the Personal-Alarm and replace all
three LR44 batteries. When putting in the new batteries, please note the correct polarity. After putting in
the new batteries please refit the housings back cover and tighten the screws.
For protecting the environment, in general please do not dispose of exhausted batteries with domestic
refuse. Batteries must be disposed of in accordance with the local regulations. Please ask your local
authority for further details. Normally batteries can be disposed of at central disposal centers. Center
information may be found in your telephonebook. Normally batteries can also be returned to the point of
sale.
4. Warranty:
SAFETY FIRST. is offering a two year warranty for this item. The guarantee period begins on the original
date of the consumer purchase sales date, which must be prove. There-fore please keep your receipt.
During the warranty period SAFETY FIRST. guarantees this product against defects that are due to faulty
material, faulty construction or work-manship. Any necessary replacement parts and any repair work will
be free of charge. This guarantee does not include damage to the product resulting from accident or
misuse.