Operation Manual

-27-
◆ Auto power on/off: Set the time of power on or power off.
◆ Power saving mode: You can view remaining battery through this function.
Restore factory Settings: Use this function to restore factory settings. The preset password is 1234.
Display
Users can access this item to set Wallpaper, Idle display, Brightness, display backlight and keypad
backlight etc.
Security settings
This function provides you with related settings about safety use
◆ PIN: To activate PIN lock, you need to input the correct PIN code. If you set PIN lock to On, you need
to input the PIN each time you power on the mobile phone. In the case you input a wrong PIN for three
consecutive times; you need to input the PIN Unblocking Key (PUK). The PUK is used to unlock and
change the locked PIN. To obtain the PUK, contact the network operator.
◆ Modify PIN2: To change PIN2 code of PIN code.
◆ Phone locked: The function enables you to lock/unlock the phone. Entering password to switch on or off
the phone. Password is required when the phone is locked. The initial password is 1234.
◆ Change phone password: to change phone password.
◆ Privacy protection: You can set password to protect your privacy, the initial password is 1234.
◆ Auto keypad lock: The function enables you to lock/unlock the keypad. Set the auto locking time, 5s,
15s, 30s, 1min and 5mins are available.
◆ Lock the phone by end-key: You can select to turn on/off this function.