Operation Manual

-25-
wrong, an error message will be prompted on the screen. After selecting a call barring option, continue to
select Activate or Deactivate. The mobile phone will prompt you to input the call barring code and then
contact the network. A moment later, the network will make a response and send the operation results to
the mobile phone.
◆ Hide ID: You can select hide ID, display own ID and or display ID by network.
◆ Others: You can set blacklist, auto call record, auto redial, call time minute reminder, vibration when
connected and reply SMS after reject through this function.
Phone Settings
◆ Date & Time: set the date format, the time format, and detail time of the location.
Note: If you remove the battery from the mobile phone or if the battery energy was exhausted a long time ago,
you may need to reset the date and time when re-inserting the battery or powering on the mobile phone after
recharging.
◆ Language settings: Select the display language and writing language for the mobile phone.
◆ Shortcut settings: Select preferred function as shortcut on screen direction key as needed.
Auto power on/off: Set the time when the mobile phone will be automatically powered on or off. Alert:
Before entering an area where the use of mobile phones is forbidden, make sure that the scheduled power-on
function is deactivated to avoid accidents.
◆ Auto power on/off: Set the time of power on or power off.
◆ Power saving mode: You can view remaining battery through this function.
Restore factory Settings: Use this function to restore factory settings. The preset password is 1234.