Dimensions

52
Intellect Wave
®
Classroom Furniture
General Information
SPECIFICATIONS
Shell
One-piece contoured shell made of
static-free, high-impact polypropylene.
Colorfastness ensured through complete
color impregnation throughout the molded
part. Strength and durability shall be assured
through an engineered internal structural
cavity which eliminates the need for unsight-
ly ribs on the back of the shell. Rolled edges
for comfort and strength. Textured front
and back. Wide, ergonomic handle molded
into chair back for ease of mobility. Fastens
to frame with six screws. Upholstered
chairs have partially exposed polypropylene
surfaces. Fabric is upholstered over 9/16"
foam on the back and seat and fastened to
an inner shell with screws.
Frames
Cantilever Chair, 4-Leg Chair, 4-Leg w/
Casters, Music Chair, and Cafe Stool
.75" x 1.5" O.D. x 15-gauge elliptical steel
tubing welded to a 14-gauge steel plate.
Frame shall be duplex nickel chrome plated
or powder coated after all welding processes
are complete.
Task Chair and Stool
The frame is constructed of a 12-gauge
base plate powder coated black with a
lever-activated pneumatic cylinder for seat
height adjustment. Availble with a seat tilt
mechanism on armless chairs only. Tilt
mechanism includes a tension adjustment
knob and a tilt lock on the seat height adjust-
ment lever.
Book Rack (under seat)
External framework of 5/16" diameter solid
wire rod attached to the chair frame with
4 screws. Cross braces of 5/16" diameter
solid wire rod welded between the external
framework. Book racks offered assembled
at factory (cartoned "CTN" only). Chairs with
book racks cannot stack and do not include
stacking bumpers. Chrome only.
Glides
Swivel type polished zinc-plated steel, nylon,
or felt Solo glides available. (Note: Felt Solo
glides will increase the height of the product
by 1/4".) Refer to the Glide Selection Guide-
lines for recommendations by floor type.
Glides - Task Chair and Stool
Adjustable molded, high-impact plastic
glides.
Casters - Task Chair, Task Stool, and 4-Leg
Chair w/Casters
Carpet Casters
Double wheels of high-impact thermoplastic.
High-impact plastic frame. Black finish only.
Hard Floor Casters
Double wheels of soft plastic. High-impact
plastic frame. Black finish only.
Pneumatic Height Adjustment - Task Chair
and Stool
Lever-activated pneumatic cylinder enables
seat height adjustment from 16-1/2" to
21-1/2" (large chair), 14" to 16-1/2" (medium
chair), and 20-1/4" to 30-3/4" (stool).
Base
Task Chair
24" injection-molded, glass-reinforced nylon
5-blade base.
Task Stool
26" injection-molded, glass-reinforced nylon
5-blade base.
Armrest - Task Chair and Stool
A tubular steel frame supports self-skinning
urethane armrests. The support is bolted to
the seat underside. Armrest paint color and
top pad are always black. (Field installable)
INFORMATION
C.O.M. Testing and Production
Requirements
Not all materials are suitable for upholster-
ing this product. A 1 yd. x 54” sample
Cantilever Chair
(IWC)
4-Leg Chair
(IW4)
Music Chair
(IWMC)
4-Leg Chair with
Casters (IW4C)
Task Chair
(IWPD)
Features
Stackable • • • •
Book rack (under seat) for 18" or larger chairs • • • •
Seat Tilt Option •
General Dimensions
Seat width x depth see chart see chart see chart see chart see chart
Seat height see chart see chart see chart see chart see chart
Overall Dimensions
Width x depth see chart see chart see chart see chart 24-1/2" x 24-1/2"
Height see chart see chart see chart see chart see chart
Stacking on Dolly - 18" Chair Only
Overall width 22-1/2" 22-1/2" 22-1/2"
Overall depth 29" 39" 38"
Quantity/height 7 chairs/62" high 10 chairs/65" high 5 chairs/53" high
Stacking on Floor - 18" Chair only
Overall Width 21" 21" 21" 21"
Overall depth 37" 34" 33" 33"
Quantity/height 5 chairs/44" high 8 chairs/49" high 5 chairs/43" high 4 chairs/40" high