User's Manual

Activating the Song (S-Seek) Alert
1. Press and hold the MEMO button for 3 seconds to enter the S-Seek Mode.
2. Press and Release the Select key. A pop-up screen displaying two selectable options - “Delete” and “S-Seek” will
appear (below left).
3. Use the Up/Down key to highlight the “S-Seek” option.
4. Press and release the Select key and a S-Seek confirmation screen will appear. Select the “On” option using Up/Down
key and press Select key to confirm (below right).
Whenever the KT-SR3000 Receiver is turned on, it automatically searches the incoming channels to determine if a match
exists with the program information stored in receiver’s memory. If one or more matches are found, a pop-up screen
momentarily appears for 2 seconds and displays “S-Seek Alert”.
An audible beep tone will be heard indicating that a match was found. The display then reverts to the SSeek
Alert screen which displays the current matches. You can select the Artist/Song Title or game that you wish to listen to.
No stored match alert is provided for the currently selected channel. To ensure that no duplicate entries are stored in
memory, the Receiver will check the stored input data to ensure the information about to be stored is not already in
memory.
• If one or more matches are found, a list appears. You can scroll through the list and select a program using the Up/Down
key. Your selection will be tuned and the display will revert to the last active display mode.
• If a selection is not chosen within 10 seconds, the screen will revert to the last active display and tuning modes.