User's Manual

Memory Options
In this mode, the user can turn the Memory Search Function (S-Seek) ON or OFF. In addition, all 30 Preset Memory
Locations can be cleared. To change the Memory Options, use the following procedure while in the “Menu Options” List
mode:
1. Use the Up/Down buttons to highlight the “Memory Options”. Press the Select key to select.
2. Select one of the following Memory Options:
a. Automatic Memory Search function - On or Off: Use the Up/Down buttons to select between On and Off by
highlighting the desired selection. Then press the Select key to store.
b. Clear All Memory Locations: Press and release the Select key; a prompt display screen appears confirming - Clear
All Memory Select “Yes” or “No” and press the Select key.
To exit this function, press the Select key or MENU button.
Time-Based Features
This Menu Option allows for adjustments of the following items:
Clock Auto Shutdown
Alarm Clock Sleep Mode
Program Alert
To change the Time-Based Features, use the following procedure while in the “Menu Options”
List mode:
1. Use the Up/Down buttons to highlight the “Time-Based Features”. Press the Select key to select.
2. Use the Up/Down buttons to select one of the following Time-Based Features to adjust:
a. Clock: When entering this menu option, you can setup the clock shown on the default display, based on the format
desired, and the time zone in which you reside. The clock data is provided via the Sirius Satellite data stream, and will
update based on the received signal.
• Format: The Clock Format option allows for either 12 Hour (Default), or 24 Hour display. Use the Up/Down buttons to
select the desired format.
• Time Zone: Since the Clock adjusts the time automatically, it is important to specify your proper time zone. Use the
Up/Down buttons to select the proper time zone. The following is a list of time zones available:
(GMT-9:00) Alaska
(GMT-8:00) Pacific
(GMT-7:00) Mountain
(GMT-6:00) Central
(GMT-5:00) Eastern
(GMT-4:00) Atlantic
(GMT-3:30) Newfoundland (Abbreviated as Newfndlnd)
• Daylight Savings Time (DST) Observance:
Activate this function if your area is subject to DST; use the Up/Down buttons to toggle between DST Observed (default)
or DST Not Observed.
b. Alarm Clock: When this menu option is highlighted and selected, you will be able to set the unit to turn on at a
specific time. The last selected channel prior to shutdown will be present when Alarm feature is activated. Alarm appears
on the first line of the display followed by the alarm options:
• Set Alarm: Use the Up/Down buttons to select “Set Alarm” From the Alarm Clock Menu. Select either “Alarm Off”
(Default) or “Alarm On” from the Menu and press the Select key to set.
• Alarm Time: Use the Up/Down buttons to select “Alarm Time” from the Alarm Clock Menu. Use the Category buttons
and the Up/Down buttons to set the time (hours, minutes) you want to activate the Receiver (Default is 12:00PM). Press
the Select key to store the Alarm Time.
c. Program Alert: When this menu option is highlighted and selected, you will be able to program the unit to switch to a