SV1 SIRIUS One SIRIUS Satellite Radio Plug and Play User and Installation Guide
CONGRATULATIONS! Your new SV1 SIRIUS One SIRIUS® Satellite Radio Plug and Play Receiver lets you enjoy SIRIUS Satellite Radio’s digital entertainment in your vehicle, home, or boat. Use this guide to familiarize yourself with all of SV1’s features and capabilities. For the latest information about this and other SIRIUS products, please visit http://www.siriusradio.com. Table of Contents Safety Precautions ........................................................... 4 FCC Warning .............................
Table of Contents (continued) Audio Level ................................................................. Signal Indicator .......................................................... Factory Default .......................................................... Specifications .................................................................. Troubleshooting ............................................................... 12 MONTH LIMITED WARRANTY ..................................
Safety Precautions Warning Take the following precautions to prevent fire and avoid personal injury: • Be sure the Receiver is installed as described in the Installation Guide. • The use suggestions contained in this User Guide are subject to any restrictions or limitations that may be imposed by applicable law—the purchaser should check applicable law for any restrictions or limitations before installing and/or operating this Receiver.
FCC Warning This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in this User Guide. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. • Reorient or relocate the receiving antenna. • Increase the separation between the other equipment and the Receiver.
Alcohol Swab and Velcro® Strips Kit (T kn o clea ow n pr ior n / un a su rf to ap know ace plyi n of ng emul any ad he sion sive s s.) SV1 SIRIUS One Receiver Su rfa ce Cle Pre an para ing tio n Package Contents The following items are packaged with the SV1 SIRIUS One. Check the package to be all of the items are included. If any of the items are missing, please contact the retailer where you purchased the product.
Installation Installation of your SV1 Receiver is easy: 1. Choose a location in your vehicle where you will mount the Receiver, either on the visor, the dash, or the windshield. 2. Mount the Receiver on the visor using the clip mount, or on the windshield using the suction cup mount. 4. Install the magnetic antenna on the roof of the vehicle, and route the antenna cable to the Receiver. 4. Connect the power cord for the Receiver to your vehicle’s cigarette lighter. 5.
Installing the Magnetic Antenna The optimum mounting location for the antenna is on the roof of the vehicle, with a minimum unobstructed area of 12 inches by 12 inches, and exactly 6½ inches from the rear roof edge of the vehicle (the length of the rubber antenna cable cover/tail). It is important to avoid any obstructions that will block the SIRIUS signal, obstructions such as a roof rack, a sunroof, roof mounted cargo containers, or other antennas.
Clean the area where the antenna and rubber antenna cable cover/tail will be mounted with the supplied alcohol swab. Connect the rubber antenna cable cover/tail to the antenna cable, making sure that the strain-relief on the antenna seats into the rubber antenna cable cover/tail groove. Route the antenna cable through the wire channel in the rubber antenna cable cover/ tail. Do not yet attach the adhesive strip.
Once the antenna cable is routed through the vehicle, and you are satisfied with the cable routing, peel the yellow protective material from the adhesive strip and adhere the adhesive strip to the rubber antenna cover/tail. Next peel the red protective material from the adhesive strip and press the rubber antenna cable cover/tail firmly into place on the vehicle.
verified that Receiver has powered on, you can proceed with activating your SIRIUS subscription. Activating your SIRIUS Subscription Before you can listen to the SIRIUS service, you need to subscribe to the SIRIUS Satellite Radio service. 1. Be sure that the Receiver is correctly installed and that the antenna is oriented to receive the SIRIUS signal. 2. Press the power button to turn Receiver On. After displaying the SIRIUS logo, the Receiver will update the SIRIUS channel line up.
(SID). You can also tune to channel 000 by using the remote: Press the Select button, then the 0 (zero) button, and then the Select button again. (This SID number is also available on the SV1 packaging.) Write the SID number down in the space provided at the end of this manual. 1 1 2 2 3 3 4 4 5 5 6 6 U P D S U B To continue, press any key on the Receiver. The installation of your Receiver is now complete, and you are ready to begin enjoying SIRIUS Satellite Radio’s digital entertainment! 6.
SV1 SIRIUS One Receiver Basic Operation 9 4. 1 8 7 5. 2 6 5 3 6. 4 1. POWER Button : Turns the Receiver’s power On and Off. 2. Channel Up/Down Buttons: Navigates through channels and display screens. 3. BAND Button (P.Tune): Pressing and releasing switches between the five preset banks (A, B, C, D and E), which hold five presets each. Pressing and SV1 Receiver User and Installation Guide 7. 8. 9.
Remote Control 1 10 2 3 9 4 5 8 5 6 7 Installing Batteries in the Remote 1. Remove the battery cover. 2. Install CR2032 battery. (+ positive side is up) 3. Replace the battery cover. 14 1. Power Button : Turns the Receiver power On and Off. 2. Number Buttons (0-9): Used for directly selecting channels and for presets. 3. BAND Button: Switches between preset bands A , B, C, D, and E. 4. MUTE Button: Mutes the audio. 5. Category Previous/Next Buttons: Navigates through categories (genres). 6.
After you have successfully activated your SIRIUS subscription, and the Receiver has received the subscription information from the SIRIUS signal, the default display screen will be displayed. 1 8 4 P r e v i e w When the Receiver is powered On, the previously selected channel will automatically begin playing, and the channel name of the current channel will be displayed. Changing Channels Pressing the channel up or down button will cause the Receiver to immediately tune to the next or previous channel.
0 1 4 C l s V i n y l 0 1 4 R o c k 0 1 4 A l i c e 0 1 4 C o S c h o o l ' s Note: If you are viewing a sports category channel list (NFL®, NBA®, NHL®, or College), pressing and releasing the DISP button will instead toggle between the team names and the current score of any live play-by-play game.
Advanced Features Channel Presets (BAND) You can store up to 30 of your favorite channels as presets for quick recall access. The preset channels are stored in 5 bands, A, B, C, D, E, and F each containing 5 channel presets, and are numbered 1 to 5. The 5 channel presets in each band are accessed by pressing the appropriate number (1 to 5) on the Receiver. A momentary press and release of the BAND button cycles through the 5 preset bands (A, B, C, D, E, and F).
Searching for a Channel Preset (P.TUNE Mode) To quickly search through all of your presets in the P.TUNE mode, do the following: 1. Press and hold the BAND button for approximately 1 second to enter the P.TUNE mode. “Preset Tuning Mode” will momentarily be displayed and the preset number will be displayed to indicate the Receiver is in the Preset Tune Mode. P . T u n e A - 1 M o d e C l s V i n y l 2.
preset list. By using the FM Frequency button, a quiet FM frequency may be quickly tuned. If no FM frequencies have been preset when the FM Frequency button is pressed, the Receiver will default to a frequency of 88.1 MHz. A preset list of FM frequencies suitable for receiving the broadcast from the Receiver over an FM radio in your location is created by using the FM Presets menu option of the Receiver.
FM Transmitter The FM Transmitter feature allows you to create a preset list of 5 suitable FM frequencies which can then be accessed by using the FM Frequency button. This option also allows you to turn the FM transmitter On and Off. F M P R E S E T S F M - 1 2. Using the channel up and down buttons, display the FM preset you wish to set (or change) and press the select button. You will then enter a list of FM frequencies, beginning with the currently selected FM frequency for the preset. 8 8 .
the FM Presets menu, press the MENU button. FM On/Off To turn the Receiver’s FM transmitter On or Off, use the channel up and down buttons to display the “FM On/Off” menu item and press the select button. F M O N F M O F F Use the channel up and down buttons to display “FM On” or “FM Off”, and press the select button. To exit the FM On/Off menu, press the MENU button. Display Options The Receiver’s display screen can be adjusted for brightness and contrast using the Display Options menu option.
Parental Control The Receiver has the ability to lock out with password protection any channels you do not want others to access without your permission. A locked channel will not appear in the channel list. L O C K / U N L O C K E d i t C o d e When access to a locked channel is attempted using the direct channel entry method, the “Enter Code” screen is displayed and the channel cannot be accessed until the correct code is entered.
Code” prompt will be displayed. Enter your four digit code and press the select button to continue. C o d e # : _ _ _ _ 4. When the correct code has been entered, a you will enter a list of channels. Use the channel up and down buttons to navigate to the channel you wish to lock or unlock, and press the select button. A previously locked channel will have the lock icon displayed to the right of the channel number. 0 1 2 S p i r i t 5.
Control code. C o d e # : _ _ _ _ 3. If you did not enter the correct code, a message will be displayed alerting you that the wrong code was entered, and you will be prompted again to enter the code. W r o n g C o d e 4. If the correct code was entered, the “New Code” prompt will appear. Enter the new Parental Control code. N e w# : _ _ _ _ 5. You will then be prompted to confirm the new code by entering it again. 24 R e t r y : _ _ _ _ 6.
Audio Level The Audio Level menu option adjusts the level of the audio output of the Receiver. To adjust the audio level, use the channel up and down buttons to change the audio level. The bar graph will move to indicate the change. - + To exit the Audio Level menu, press the MENU button. Signal Indicator The Signal Indicator display screen provides a visual display of the strength of the SIRIUS signal from the satellite antenna and also from terrestrial (ground) transmitters.
settings. The following is a list of all features affected by the Factory Default option: • All Presets are cleared • Receiver set to Normal Tuning Mode • Display brightness set to 50% • Display Contrast set to 50% • FM Transmitter set to On • FM Frequency set to 88.1 MHz Note that the Parental Control feature is not affected by the Factory Default option.
Troubleshooting This section lists several common problems and suggested solutions. If, after trying the suggested solutions listed here, you are still unable to resolve the problem you’re having with your Receiver, contact your installer, dealer, or retailer for more help. Problem Cause and Suggested Solution Receiver does not power on Blown fuse, or the power cable is not properly connected. Check for a bad fuse and check power cable connection.
Specifications Satellite Frequencies ............................................................................................. 2322.293/2330.207 MHz Terrestrial Frequencies ......................................................................................................... 2326.250MHz Power Requirements ............................................................................... 9-16 Volts, Negative Ground, DC Audio Output .........................................................................
12 MONTH LIMITED WARRANTY SIRIUS Satellite Radio Inc. (the “Company”) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company’s option) without charge for parts and repair labor.
Please record the SIRIUS ID (SID) in the space provided below: SIRIUS ID: SIRIUS Customer Service: 1-888-539-7474 SIRIUS Product Support: 1-800-869-5590 customercare@sirius-radio.
SIRIUS Satellite Radio Inc. 1221 Avenue of the Americas New York, NY 10020 1-888-539-7474 www.sirius.