Owner’s Manuals

Features of your vehicle
944
8. SCAN Button
Plays 10 seconds of each song in the
USB device.
Press the button once again to cancel
scanning.
✽✽
NOTICE FOR USING i-Pod
DEVICE
• Some i-Pod models might not support
the communication protocol and the
files will not be played. (i-Pod models
supported: Mini, 4G, Photo, Nano,
5G)
• The order of search or playback of
songs in the i-Pod can be different
from the order searched in the audio
system.
• If the i-Pod crashes due to its own
trouble, reset the i-Pod. (Reset: Refer
to i-Pod manual)
• i-Pod may not operate normally on
low battery.
CAUTION IN USING
i-Pod DEVICE
• You need an exclusive power
cable for i-Pod (purchased sepa-
rately) in order to operate i-Pod
with the buttons on the audio sys-
tem. The PC cable provided by
Apple may cause malfunction. Do
not use it for vehicle use.
• When connecting the device with
an i-Pod cable, push in the jack
fully not to interfere with commu-
nication.
• When adjusting the sound effects
of the i-Pod and the audio system,
the sound effects of both devices
will overlap each other and might
reduce or distort the quality of the
sound.
• Deactivate (turn off) the equalizer
function of the i-Pod when adjust-
ing the audio system’s volume,
and turn off the equalizer of the
audio system when using the
equalizer of the i-Pod.
(Continued)
(Continued)
• When the i-Pod cable is connected,
the system can be switched to the
AUX mode even without the i-Pod
device and can cause noise.
Disconnect the i-Pod cable when
you are not using the i-Pod
device.