Owner’s Manuals

What to do in an emergency
186
10. Switch the On/Off switch (8) to
the "I"-position.
Please note: When the sealing
compound is added through the
tire valve the pressure gauge
could increase from approxi-
mately 4-6 bar (60-90 psi), but it
will drop again after about 30
seconds.
11. Inflate the tire to at least 1.8 bar
(26 psi) and at most 3.5 bar (51
psi) within 7 minutes. Switch off
the compressor briefly by press-
ing "O" so you are be able to read
the actual tire inflation pressure
on the gauge.
CAUTION
During the tire inflation opera-
tion do not stand next to the
damaged tire. Check the side-
wall of the tire for unusual
bulges or deformations.
Discontinue the inflation opera-
tion and deflate the tire by using
the pressure release (10), if any
unusual appearance is noticed.
CAUTION
If a tire inflation pressure of 1.8
bar (26 psi) is not achievable
within 7 minutes, the tire is too
severely damaged and you must
not drive on the tire. Call for
road side service or towing.
OUN066103L