User Manual

Maintenance
427
G210201AAM
Multi fuse
If the multi fuse is blown, it must be
removed as follows:
1. Tur n off the engine.
2. Disconnect the negative batter y cable.
3. Remove the fuse panel on the right
side in the engine compar tment.
4. Remove the nuts shown in the picture
above.
5. Replace the fuse with a new one of the
same rating.
6. Reinstall in the reverse order of
removal.
✽✽
NOTICE
If the multi fuse is blown, consult an
authorized KIA dealer.
OTD079025
CAUTION
After checking the fuse panel in the
engine compartment, securely
install the fuse panel cover. If not,
electrical failures may occur from
water leaking in.