User guide

Knowing your vehicle
1023
1. TAPE PROGRAM Button
• This allows you to play the reverse side
of the tape by merely depressing the
program button. An arrow will appear in
the display to show tape direction.
• Push the TAPE button while the tape is
in the tape deck, to turn on that func-
tion without pushing Power ON-OFF
control knob.
2. TAPE EJECT Button
• When the button is pressed with a
cassette loaded, the cassette will eject.
• When the button is pressed during
FF/REW mode, the cassette will eject.
3. DOLBY Button
If you get background noise during tape
PLAY, you can reduce this considerably
by merely pressing the DOLBY button. If
you want to cancel the DOLBY feature,
press the button again.
4. REPEAT (RPT) Button
• To repeat the track you are currently
listening to, press the RPT button. To
cancel, press again.
• If you do not release RPT operation
when the track ends, it will automati-
cally be replayed.
This process will be continued until you
push the button again or turn the
power OFF then ON.
5. AUTO MUSIC Search (AMS)
Button
Press the button to find the starting point
of each song in a prerecorded music
tape. The quiet space between songs
(must have at least 4 sec. gap) can be
identified by the AUTO MUSIC SEARCH
button.
• Pressing the button will play the
beginning of the next music segment.
• Pressing the button will start replay
at the beginning of the music just lis-
tened to.
• To stop FF or REW action, press the
button again.
6. FF/REW Button
• Forward tape winding starts when the
FF button is pressed during PLAY or
REW mode.
• Tape PLAY starts when the FF button
is pressed again during FF mode.
• Tape rewinding starts when the REW
button is pressed during PLAY or FF
mode.
• Tape PLAY starts when the REW but-
ton pressed again during REW mode.
✽✽
NOTICE
• Do not insert anything like coins into
the player slot as damage to the unit
may occur.
• Do not place beverages close to the
audio system. The playback mecha-
nism may be damaged if you spill
them.
• Do not strike or allow anything to
impact the audio system, damage to
the system mechanisms could occur.