Operation Manual

4141
Features of your vehicle
Mounting bracket for roof carrier
(if equipped)
To install or remove a roof carrier,
you can use the mounting bracket
and cover on the roof.
When you install a roof carrier, do
the following procedure.
1. Insert a slim tool (coin or flat blade
driver) into the slot and slide the
cover toward the arrow on the
cover.
2. Rotate the cover half way and
insert the cover on the roof hole as
the illustration.
✽✽
NOTICE
To prevent losing the roof carrier
cover, install the cover on the roof
before you install the roof carrier.
3. After using the roof carrier, install
the cover back on the roof in the
reverse order.
EXTERIOR FEATURES
WARNING
Use a coin or flat blade driver
when you remove the roof carri-
er cover.
If you use your fingernail, it may
injure your finger.
OED046091
OPS043207