Installation Guide

OPERATION
5
1
Setting the Clock
2
Operating in Manual Mode
3
Setting PHOTO EYE AUTO
ON/OFF
4
Setting PHOTO EYE ON /
TIME OFF
This setting allows you to set the clock to local time.
a) Press MENU until CLOCK LED indicator is lit and the
digit indicator is flashing. Then press ENTER.
b) When AM and PM begins to flash, press the UP or
DOWN arrow button to select AM or PM and press
ENTER.
c) When the hour begins to flash, press the UP or DOWN
arrow to disired hour and press ENTER.
d) When the minute begins to flash, press the UP or DOWN
arrow to desired minute and press ENTER.
e) The clock setting is now complete.
NOTE: To scroll through the clock settings more quickly,
press and hold down the UP and DOWN arrows.
This setting allows the PHOTO EYE to turn the lights on at
dusk and off at dawn.
a) Press MENU until the PHOTO EYE AUTO ON/OFF LED
indicator is lit and then press ENTER. The PHOTO EYE
AUTO ON OFF mode is not activated. The digit display
shows the current time and the AM/PM LED indicator
stays lit.
b) The start delay time is 0.1 sec
f1 sec. ; the off delay
time is 60 sec.
f10 sec.
This setting allows you to immediately turn the lights on
and off when you no longer need them.
a) Press MENU until MANUAL ON/OFF LED indicator is lit
and then press ENTER.
b)The MANUAL ON/OFF mode is now set to ON. Press the
UP arrow button to turn on the lights. Press the DOWN
arrow button to turn off the lights.
This setting allows the PHOTO EYE to turn the lights on
and you set the time they go off.
a) Press MENU until the PHOTO ON / TIME OFF LED
indicator is lit and press ENTER or wait 3 sec.
b) When AM and PM begins to flash, press the UP or
DOWN arrow button to select AM or PM and press
ENTER.
c) When the minute begins to flash press the UP or DOWN
arrow to desired hour and press ENTER.
d) When the minute begins to flash, Press Up or DOWN
arrow to desired minute and press ENTER.
e) The setting is now complete. The PHOTO EYE
ON/TIME OFF LED indicator stays lit and the display
shows the current time. The lights will automatically turn
on at night and will turn off after a set time interval.