ITEM #0615979 2-TIER 9-LIGHT CHANDELIER Kichler® is a registered trademark of The L.D. Kichler Co. All Rights Reserved. MODEL #34695 Français p. 11 Español p. 21 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-554-6504, 8 a.m. - 4:30 p.m, EST, Monday - Friday.
PACKAGE CONTENTS B A D C H I K L F G E O J N M P PART A B C D E F G H DESCRIPTION Canopy Mounting Bracket Threaded Nipple Hex Nut Socket Coupling Socket Cover Screw Collar Ring QTY 1 1 1 3 9 1 9 1 PART I J K L M N O P 2 DESCRIPTION Screw Collar Loop Finial Chain Fixture Loop Finial Coupling Decorative Assembly Arm Decorative Cap QTY 1 1 1 1 1 1 9 1
HARDWARE CONTENTS AA Wire Connector Qty: 3 BB Short Machine Screw Qty: 2 CC Thumbscrew Qty: 6 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Place the main power switch in the “OFF” position and unscrew the fuse(s), or switch “OFF” the circuit breaker switch(es), that control the power to the fixture or room you are working in.
ASSEMBLY INSTRUCTIONS 1. Screw fixture loop (L) onto coupling (F). 1 L F 2. Pass decorative cap (P) over finial coupling (M) and secure with finial (J). 2 J Note: The decorative assembly arms will line up with the notches on the decorative cap. P M 3. Raise decorative assembly (N) to arms (O) and secure with thumbscrews (CC).
ASSEMBLY INSTRUCTIONS 4. Position threaded nipple (C) in mounting bracket (B) so that, when mounted: • • The threaded nipple (C) will protrude a minimum of ¼ inch beyond the raised center portion of the bracket (B). The threaded nipple (C) height should be positioned so that ½ the exterior threads of the screw collar loop (I) will extend past the canopy (A), when it is mounted. 5.
ASSEMBLY INSTRUCTIONS 7. Using the open chain links on chain (K), attach one end to screw collar loop (I) and the other end to fixture loop (L). Weave the fixture electrical and ground wires through every other chain link and pass through threaded nipple (C) into outlet box. Lower the screw collar ring (H) and canopy (A) over the chain (K). 7 Outlet Box I C K A H L 8.
ASSEMBLY INSTRUCTIONS 9. Pass canopy (A) over the screw collar loop (I). Attach screw collar ring (H) to screw collar loop (I) to secure canopy (A). 9 A I H 10. Lower socket cover (G) over socket (E). Insert 60-watt max. candelabra-base bulb (not included) into socket (E). 10 Repeat for remaining sockets (E).
CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. • All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE 1.CORRECTIVE Check wiring. ACTION Fixture does not light. 1.
WARRANTY (continued) This warranty does not apply to any products that have been subjected to misuse, mishandling, misapplication, connected to voltage at more than 5% above standard North American voltage, unusual use (including but not limited to use in an environment where the annual average ambient operating temperature is below 27 or above 95 degrees Fahrenheit), neglect (including but not limited to improper maintenance), accident, acts of god such as high winds, improper installation or care, failure
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-800-554-6504, 8 a.m. - 4:30 p.m., EST, Monday - Friday.
ARTICLE #0615979 LUSTRE À 2 NIVEAUX ET 9 LUMIÈRES Kichler® est une marque déposée de The L.D. Kichler Co. Tous droits réservés. MODÈLE #34695 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner le produit à votre détaillant, appelez notre service à la clientèle au 1-800-554-6504, entre 8 h et 16 h 30 (HNE) du lundi au vendredi.
CONTENU DE L’EMBALLAGE B A D C H I K L F G E O J N M P PIÈCE A B C D E F G H DESCRIPTION Pavillon Support de fixation Raccord fileté Écrou hexagonal Douille Raccord Cache douille Bague de l’anneau du pavillon QTÈ 1 1 1 3 9 1 9 1 PIÈCE DESCRIPTION QTÈ I Anneau de suspension du pavillon 1 Fleuron J 1 K 1 Chaîne L Anneau de suspension du luminaire 1 Raccord du fleuron M 1 N 1 Assemblage décoratif Bras O 9 1 P Capuchon décoratif 12
QUINCAILLERIE INCLUSE AA BB Capuchon de connexion Vis à Qté : 3 métaux courte Qté : 2 CC Vis à manuelle Qté : 6 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : Coupez l’électricité avant TOUTE manipulation. • Accédez au panneau central de disjoncteurs ou de fusibles de votre demeure et placez l’interrupteur principal en position d’arrêt (« OFF »).
INSTRUCTIONS POUR L'ASSEMBLAGE 1. Vissez l'anneau de suspension du luminaire (L) dans le raccord (F).t 1 L F 2. Faites passer le capuchon décoratif (P) sur le raccord du fleuron (M) et fixez à l'aide du fleuron (J). 2 J Remarque : Les bras de l'assemblage décoratif s'aligneront face aux encoches situées sur le capuchon décoratif. P M 3. Soulevez l'assemblage décoratif (N), placez-le contre les bras (O) et fixez-le à l'aide des vis manuelles (CC).
INSTRUCTIONS POUR L'ASSEMBLAGE 4. Positionnez le raccord fileté (C) dans le support de fixation (B) de sorte que, une fois le montage effectué : • • • • Vissez le 1er écrou hexagonal (D) sur le raccord fileté (C) et serrez-le contre la partie saillante du support (B). Vissez le 2e écrou hexagonal (D) sur le raccord fileté (C) et serrez-le contre la partie plate du support de fixation (B).
INSTRUCTIONS POUR L'ASSEMBLAGE 7. À l'aide des anneaux ouverts de la chaîne (K), attachez une extrémité de la chaîne à l'anneau de suspension du pavillon (I) et l'autre extrémité à l'anneau de suspension du luminaire (L). Tressez le fil de terre et les fils électriques du luminaire à travers un maillon sur deux de la chaîne et faites-les passer à travers le raccord fileté (C) puis dans la boîte de sortie. Abaissez la bague de l’anneau du pavillon (H) et le pavillon (A) le long de la chaîne (K).
INSTRUCTIONS POUR L'ASSEMBLAGE 9. Faites passer le pavillon (A) sur l'anneau de suspension du pavillon (I). Attachez la bague de l'anneau du pavillon (H) à l'anneau de suspension du pavillon (I) pour fixer le pavillon (A). 9 A I H 10. Placez le cache douille (G) par-dessus la douille (E). Insérez une ampoule à culot candélabre de 60 watts max. (non fournie) dans la douille (E). 10 Répétez l'opération pour les douilles restantes (E).
ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif. N’utilisez jamais de nettoyants pour vitres; vous risqueriez d’endommager le fini métallique du luminaire. • Les abat-jour en verre peuvent être nettoyés dans un évier couvert de serviettes, à l’aide d’eau tiède et de savon doux. Ne nettoyez pas les abat-jour dans un lave-vaisselle. DÉPANNAGE PROBLÈME Le luminaire ne s’allume pas. CAUSE POSSIBLE 1.
GARANTIE (suite) Cette garantie ne s'applique pas aux produits qui ont été soumis à un usage abusif, une manipulation inadéquate, un usage impropre, qui ont été connectés à un voltage de plus de 5 % supérieur au voltage nord américain, qui ont subi un usage inhabituel (y compris mais sans s'y limiter un usage dans un environnement où la température ambiante moyenne annuelle est inférieure à 27 °F [-2,8 °C] ou supérieure à 95 °F [35 °C]), la négligence (y compris mais sans s'y limiter un mauvais entretien),
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, appelez notre service à la clientèle au 1-800-554-6504, entre 8 h et 16 h 30 (HNE), du lundi au vendredi.
ARTÍCULO #0615979 Kichler® es una marca registrada de The L.D. Kichler Co. Todos los derechos reservados. ARAÑA DE 9 LUCES, 2 NIVELES MODELO #34695 ADJUNTE SU RECIBO AQUÍ Número de serie Fecha de compra ¿Preguntas, problemas, piezas faltantes? Antes de devolverlo a la tienda, llame a nuestro departamento de servicio al cliente al 1-800-554-6504, de 8:00 a.m. a 4:30 p.m. hora del Este (EST), de lunes a viernes.
CONTENIDO DEL PAQUETE B A D C H I K L F G E O J N M P PIEZA A B C D E F G H DESCRIPCIÓN Cubierta Soporte de montaje Manguito roscado Tuerca hexagonal Portalámparas Acoplamiento Cubierta del portalámparas Anillo de cuello roscado CANT 1 1 1 3 9 1 9 1 PIEZA I J K L M N O P 22 DESCRIPCIÓN Bucle de cuello roscado Remate Cadena Bucle para colgar la lámpara Acoplamiento del remate Conjunto decorativo Brazo Tapa decorativa CANT 1 1 1 1 1 1 9 1
ADITAMENTOS AA Conector de cables Cant.: 3 BB CC Tornillo de Tornillo apriete manual corto Cant.: 6 para metales Cant.: 2 INFORMACIÓN DE SEGURIDAD Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto. • • • • • ADVERTENCIA IMPORTANTE: NUNCA intente hacer trabajos sin desconectar el suministro eléctrico. Coloque el interruptor de alimentación principal en la posición “OFF” (APAGADO). Coloque el interruptor de la pared en la posición “OFF” (APAGADO).
INSTRUCCIONES DE ENSAMBLAJE 1. Atornille el bucle de la lámpara (L) al acoplamiento (F). 1 L F 2. Pase la tapa decorativa (P) sobre el acoplamiento del remate (M) y fíjela con el remate (J). 2 J Nota: Los brazos del conjunto decorativo se alinean con las muescas en la tapa decorativa. P M 3. Levante el conjunto decorativo (N) a los brazos (O) y fíjelo con tornillos de ajuste manual (CC).
INSTRUCCIONES DE ENSAMBLAJE 4. Coloque el manguito roscado (C) en el soporte de montaje (B), de manera que al quedar montado: • • • • B ¼ pulgada C El manguito roscado (C) sobresalga un mínimo de 6.35 mm (1/4") encima de la porción central elevada del soporte (B). La altura del manguito roscado (C) esté colocada de manera que la mitad de las roscas exteriores del bucle de cuello roscado (I) sobresalga encima de la cubierta (A) cuando esté montada. 5.
INSTRUCCIONES DE ENSAMBLAJE 7. Usando los eslabones abiertos en la cadena (K), fije un extremo al bucle de cuello roscado (I) y el otro extremo al bucle de la lámpara (L). Entrelace los cables eléctricos y a tierra de la lámpara por los eslabones, uno sí y otro no, y páselos por el manguito roscado (C) a la caja eléctrica. Deslice el anillo de cuello roscado (H) y la cubierta (A) por la cadena (K). 7 Caja de C salida I K A H L 8.
INSTRUCCIONES DE ENSAMBLAJE 9. Pase la cubierta (A) sobre el bucle de cuello roscado (I). Fije el anillo de cuello roscado (H) al bucle de cuello roscado (I) para fijar la cubierta (A). 9 A I H 10. Baje la cubierta del portalámparas (G) sobre el portalámparas (E). Inserte un foco de base para candelabro de máximo 60 W (no se incluye) en el portalámparas (E). 10 Repita para los portalámparas restantes (E).
CUIDADO Y MANTENIMIENTO • Siempre asegúrese de que la corriente eléctrica esté desconectada antes de limpiar. • Utilice un paño húmedo suave y jabón suave no abrasivo para limpiar la lámpara. Nunca utilice un limpiador para vidrio en la lámpara, porque éste dañará el acabado metálico. • Las pantallas de vidrio se pueden lavar dentro de un lavabo recubierto con toallas usando agua tibia y jabón suave. No lave las pantallas en un lavaplatos automático.
GARANTÍA (continuación) Esta garantía no aplica a ningún producto que haya sido objeto de uso indebido, manipulación indebida, aplicación indebida, conectado a voltaje superior al 5 % del voltaje norteamericano estándar, uso inusual (incluyendo sin limitación el uso en un ambiente donde la temperatura promedio anual de operación sea inferior a 27 oF [-2.
LISTA DE PIEZAS DE REPUESTO Para repuestos, llame a nuestro departamento de servicio al cliente al 1-800-554-6504, de 8:00 a.m. a 4:30 p.m. hora del Este (EST), de lunes a viernes.