ITEM #0616026 PENDANT Kichler® is a registered trademark of The L.D. Kichler Co. All Rights Reserved. MODEL #34707 Français p. 11 Español p. 21 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-554-6504, 8 a.m. - 4:30 p.m, EST, Monday - Friday.
PACKAGE CONTENTS G B A D J C F H I E K O L P M N R Q S PART A B C D E F G H I J K DESCRIPTION Canopy Mounting Bracket Threaded Nipple Hex Nut Socket Coupling Decorative Tube Screw Collar Ring Screw Collar Loop Threaded Pipe Chain QTY 1 1 1 4 2 1 1 1 1 1 1 PART L M N O P Q R S T 2 T DESCRIPTION Fixture Loop Diffuser Tube Ring Arm Shade Metal Washer Nylon Washer Decorative Cap Finial D QTY 1 1 1 1 1 2 2 1 1
HARDWARE CONTENTS AA Wire Connector Qty: 3 BB Short Machine Screw Qty: 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Place the main power switch in the “OFF” position and unscrew the fuse(s), or switch “OFF” the circuit breaker switch(es), that control the power to the fixture or room you are working in.
ASSEMBLY INSTRUCTIONS 1. Screw upper threaded pipe (J) onto upper coupling (F). 1 J F 2. Pass decorative tube (G) and tube ring (N) over threaded pipe (J) and secure with fixture loop (L). 2 L N G J 3. Insert 60-watt max. medium-base bulb (not included) into socket (E). 3 Repeat for remaining socket.
ASSEMBLY INSTRUCTIONS 4 O M P R Q D 4. Raise one metal washer (Q) and one nylon washer (R) over arm (O). Next raise shade (P), diffuser (M), the second nylon washer (R) and the second metal washer (Q) over the arm (O) and secure in place using a hex nut (D). 5. Raise decorative cap (S) over arm (O) and secure in place with finial (T). 5 O S T 6.
ASSEMBLY INSTRUCTIONS 7. Once the proper position of the threaded nipple (C) and bracket (B) has been determined, secure with 3 hex nuts (D) as follows: • • • Screw 1st hex nut (D) onto the threaded nipple (C) and tighten against the raised portion of the bracket (B). Screw 2nd hex nut (D) onto the threaded nipple (C) and tighten against the flat portion of the mounting bracket (B). Screw the third hex nut (D) onto threaded nipple (C) and tighten against the screw collar loop (I). 8.
ASSEMBLY INSTRUCTIONS 9. Using the open chain links on chain (K), attach one end to screw collar loop (I) and the other end to fixture loop (L). Weave the fixture electrical and ground wires through every other chain link and pass through threaded nipple (C) into outlet box. Lower the screw collar ring (H) and canopy (A) over the chain (K). 9 Outlet Box I C K A H L 10.
ASSEMBLY INSTRUCTIONS 11. Pass canopy (A) over the screw collar loop (I). Attach screw collar ring (H) to screw collar loop (I) to secure canopy (A). 11 A I H CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. • All glass shades may be washed in a towel-lined sink with warm water and mild soap.
WARRANTY Kichler Lighting warrants that its products will be free from defects in material and workmanship for one (1) year from the date of purchase by the Original Purchaser. To replace a product that has a warranted defect, the Original Purchaser shall return any allegedly defective parts or products to the authorized Kichler distributor that the product was purchased from with PROOF OF PURCHASE, Original Purchaser’s name and return address and a description of the claimed product defect.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-800-554-6504, 8 a.m. - 4:30 p.m., EST, Monday - Friday.
ARTICLE #0616026 LUMINAIRE SUSPENDU Kichler® est une marque déposée de The L.D. Kichler Co. Tous droits réservés. MODÈLE #34707 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner le produit à votre détaillant, appelez notre service à la clientèle au 1-800-554-6504, entre 8 h et 16 h 30 (HNE) du lundi au vendredi.
CONTENU DE L’EMBALLAGE G B A D J C F H I E K O L P M N R Q S PIÈCE DESCRIPTION QTÈ A Pavillon 1 Support de fixation B 1 C 1 Raccord fileté D 4 Écrou hexagonal 2 Douille E 1 F Raccord 1 G Tube décoratif 1 H Bague de l'anneau du pavillon I Anneau de suspension du pavillon 1 1 J Tube fileté 1 K Chaîne T D PIÈCE DESCRIPTION Anneau de suspension du luminaire L M Diffuseur N Bague du tube O Bras P Abat-jour Q Rondelle métallique R Rondelle nylon S Capuchon décoratif T Fleuron 12 QTÈ 1 1 1 1 1 2 2 1
QUINCAILLERIE INCLUSE AA BB Capuchon de connexion Vis à Qté : 3 métaux courte Qté : 2 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : Coupez l’électricité avant TOUTE manipulation. • Accédez au panneau central de disjoncteurs ou de fusibles de votre demeure et placez l’interrupteur principal en position d’arrêt (« OFF »).
INSTRUCTIONS POUR L'ASSEMBLAGE 1. Vissez le tube fileté (J) dans le raccord (F). 1 J F 2. Abaissez le tube décoratif (G) et la bague du tube (N) par-dessus le tube fileté (J) et fixez anneau de suspension du luminaire (L). 2 L N G J 3. IInsérez une ampoule à culot moyen de 60 watts max. (non fournie) dans la douille (E). 3 Répétez l'opération pour les douilles restante.
INSTRUCTIONS POUR L'ASSEMBLAGE 4 O M P R Q D 4. Insérez une rondelle métallique (Q) et une rondelle nylon (R) sur le bras (O). Ensuite, faites passer successivement l'abat-jour (P), diffuseur (M), la deuxième rondelle nylon (R) et la deuxième rondelle métallique (Q) sur le bras (O) et fixez le tout en place à l'aide d'un écrou hexagonal (D). 5. Faites passer le capuchon décoratif (S) sur le bras (O) et fixez à l’aide du fleuron (T). 5 O S T 6.
INSTRUCTIONS POUR L'ASSEMBLAGE 7. Lorsque les positions correctes du raccord fileté (C) et du support (B) ont été déterminées, fixez à l'aide de 3 écrous hexagonaux (D), comme suit : • • • Vissez le 1er écrou hexagonal (D) sur le raccord fileté (C) et serrez-le contre la partie saillante du support (B). Vissez le 2e écrou hexagonal (D) sur le raccord fileté (C) et serrez-le contre la partie plate du support de fixation (B).
INSTRUCTIONS POUR L'ASSEMBLAGE 9. À l'aide des anneaux ouverts de la chaîne (K), attachez une extrémité à l'anneau de suspension du pavillon (I) et l'autre extrémité à l'anneau de suspension du luminaire (L). Tressez le fil de terre et les fils électriques du luminaire à travers un maillon sur deux de la chaîne et faites-les passer à travers le raccord fileté (C) puis dans la boîte de sortie. Abaissez la bague de l’anneau du pavillon (H) et le pavillon (A) le long de la chaîne (K).
INSTRUCTIONS POUR L'ASSEMBLAGE 11. Faites passer le pavillon (A) sur l'anneau de suspension du pavillon (I). Attachez la bague de l’anneau du pavillon (H) à l'anneau de suspension du pavillon (I) pour fixer le pavillon (A). 11 A I H ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif. N’utilisez jamais de nettoyants pour vitres; vous risqueriez d’endommager le fini métallique du luminaire.
GARANTIE Kichler Lighting garantit que ses produits seront libres de tout vice de fabrication ou défaut matériel pendant un (1) an à compter de la date d'achat par l'acheteur initial.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, appelez notre service à la clientèle au 1-800-554-6504, entre 8 h et 16 h 30 (HNE), du lundi au vendredi.
ARTÍCULO #0616026 Kichler® es una marca registrada de The L.D. Kichler Co. Todos los derechos reservados. LÁMPARA COLGANTE MODELO #34707 ADJUNTE SU RECIBO AQUÍ Número de serie Fecha de compra ¿Preguntas, problemas, piezas faltantes? Antes de devolverlo a la tienda, llame a nuestro departamento de servicio al cliente al 1-800-554-6504, de 8:00 a.m. a 4:30 p.m. hora del Este (EST), de lunes a viernes.
CONTENIDO DEL PAQUETE G B A D J C F H I E K O L P M N R Q S PIEZA A B C D E F G H I J K DESCRIPCIÓN Cubierta Soporte de montaje Manguito roscado Tuerca hexagonal Portalámparas Acoplamiento Tubo decorativo Bucle de cuello roscado Anillo de cuello roscado Tubo roscado Cadena CANT 1 1 1 4 2 1 1 1 1 1 1 PIEZA L M N O P Q R S T 22 T D DESCRIPCIÓN Bucle para colgar la lámpara Difusor Anillo del tubo Brazo Pantalla Arandela metálica Arandela de nylon Tapa decorativa Remate CANT 1 1 1 1 1 2 2 1 1
ADITAMENTOS AA Conector de cables Cant.: 3 BB Tornillo corto para metales Cant.: 2 INFORMACIÓN DE SEGURIDAD Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto. • • • • • ADVERTENCIA IMPORTANTE: NUNCA intente hacer trabajos sin desconectar el suministro eléctrico. Coloque el interruptor de alimentación principal en la posición “OFF” (APAGADO). Coloque el interruptor de la pared en la posición “OFF” (APAGADO).
INSTRUCCIONES DE ENSAMBLAJE 1. Atornille el tubo roscado (J) al acoplamiento (F). 1 J F 2. Baje el tubo decorativo (G) y el anillo del tubo (N) sobre el tubo roscado (J) y asegúrelos con bucle para colgar la lámpara (L). 2 L N G J 3. Inserte un foco de base media de máximo 60 W (no se incluye) en el portalámparas (E). 3 Repita para los portalámparas restante.
INSTRUCCIONES DE ENSAMBLAJE 4 O M P R Q D 4. Suba una arandela metálica (Q) y una arandela de nylon (R) sobre el brazo (O). Luego suba la pantalla (P),difusor (M), la segunda arandela de nylon (R) y la segunda arandela metálica (Q) sobre el brazo (O) y fíjelas en su sitio usando una tuerca hexagonal (D). 5. Suba la tapa decorativa (S) sobre el brazo (Q) y fíjela en su sitio con el remate (T). 5 O S T 6.
INSTRUCCIONES DE ENSAMBLAJE 7. Una vez se haya determinado la posición adecuada del manguito roscado (C) y del soporte (B), fíjelos con 3 tuercas hexagonales (D) como se indica a continuación: • • • 7 ¼ pulgada B C Atornille la primera tuerca hexagonal (D) al manguito roscado (C) y apriétela contra la porción que sobresale del soporte (B). Atornille la segunda tuerca hexagonal (D) al manguito roscado (C) y apriétela contra la porción plana del soporte de montaje (B).
INSTRUCCIONES DE ENSAMBLAJE 9. Usando los eslabones abiertos en la cadena (K), fije un extremo al bucle de cuello roscado (I) y el otro extremo al bucle de la lámpara (L). Entrelace los cables eléctricos y a tierra de la lámpara por los eslabones, uno sí y otro no, y páselos por el manguito roscado (C) a la caja eléctrica. Deslice el anillo de cuello roscado (H) y la cubierta (A) por la cadena (K). 9 Caja de salida I C K A H L 10.
INSTRUCCIONES DE ENSAMBLAJE 11. Pase la cubierta (A) sobre el bucle de cuello roscado (I). Fije el anillo de cuello roscado (H) al bucle de cuello roscado (I) para fijar la cubierta (A). 11 A I H CUIDADO Y MANTENIMIENTO • Siempre asegúrese de que la corriente eléctrica esté desconectada antes de limpiar. • Utilice un paño húmedo suave y jabón suave no abrasivo para limpiar la lámpara. Nunca utilice un limpiador para vidrio en la lámpara, porque éste dañará el acabado metálico.
GARANTÍA Kichler Lighting garantiza que sus productos estarán libres de defectos de materiales o mano de obra por un (1) año a partir de la fecha de compra por el Comprador Original.
LISTA DE PIEZAS DE REPUESTO Para repuestos, llame a nuestro departamento de servicio al cliente al 1-800-554-6504, de 8:00 a.m. a 4:30 p.m. hora del Este (EST), de lunes a viernes.