ITEM #0616028 PENDANT Kichler® is a registered trademark of The L.D. Kichler Co. All Rights Reserved. MODEL #34720 Français p. 11 Español p. 21 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-554-6504, 8 a.m. - 4:30 p.m, EST, Monday - Friday.
PACKAGE CONTENTS B A C D H I K L G N O M J F E Q P T S R U V PART A B C D E F G H I J K DESCRIPTION Canopy Mounting Bracket Threaded Nipple Hex Nut Socket Assembly Coupling Threaded Tube Screw Collar Ring Screw Collar Loop Upper Threaded Pipe Chain QTY 1 1 1 6 3 1 1 1 1 1 1 PART L M N O P Q R S T U V 2 DESCRIPTION Fixture Loop Decorative Tube Tube Coupling Decorative Tube Ring Lower Threaded Pipe Inner Shade Nylon Washer Metal Washer Diffuser Decorative Cap Finial QTY 1 1 1 1 1 1 2 2 1 1 1
HARDWARE CONTENTS AA Wire Connector Qty: 3 BB Short Machine Screw Qty: 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Place the main power switch in the “OFF” position and unscrew the fuse(s), or switch “OFF” the circuit breaker switch(es), that control the power to the fixture or room you are working in.
ASSEMBLY INSTRUCTIONS 1. Screw upper threaded pipe (J) onto coupling (F). 1 J F 2. Lower decorative tube (M) and decorative tube ring (O) over upper threaded pipe (J) and secure with tube coupling (N). 2 N O M J 3 L G 3. Screw threaded tube (G) onto tube coupling (N). Screw fixture loop (L) onto threaded tube (G).
ASSEMBLY INSTRUCTIONS 4. Position threaded nipple (C) in mounting bracket (B) so that, when mounted: • • The threaded nipple (C) will protrude a minimum of ¼ inch beyond the raised center portion of the bracket (B). The threaded nipple (C) height should be positioned so that ½ the exterior threads of the screw collar loop (I) will extend past the canopy (A), when it is mounted. 5.
ASSEMBLY INSTRUCTIONS 7. Using the open chain links on chain (K), attach one end to screw collar loop (I) and the other end to fixture loop (L). Weave the fixture electrical and ground wires through every other chain link and pass through threaded nipple (C) into outlet box. Lower the screw collar ring (H) and canopy (A) over the chain (K). 7 Outlet Box I C K A H L 8.
ASSEMBLY INSTRUCTIONS 9. Pass canopy (A) over the screw collar loop (I). Attach screw collar ring (H) to screw collar loop (I) to secure canopy (A). 9 A I H 10. Screw lower threaded pipe (P) onto socket assembly (E). 10 E P 11. Insert three, 60-watt medium-base bulbs (not included) into socket assembly (E). 11 E 12. Raise inner shade (Q), metal washer (S), nylon washer (R), and diffuser (T) over lower threaded pipe (P).
ASSEMBLY INSTRUCTIONS 13. Pass decorative cap (U) over lower threaded pipe (P) and secure with finial (V). 13 P U V CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. • All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher.
WARRANTY Kichler Lighting warrants that its products will be free from defects in material and workmanship for one (1) year from the date of purchase by the Original Purchaser. To replace a product that has a warranted defect, the Original Purchaser shall return any allegedly defective parts or products to the authorized Kichler distributor that the product was purchased from with PROOF OF PURCHASE, Original Purchaser’s name and return address and a description of the claimed product defect.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-800-554-6504, 8 a.m. - 4:30 p.m., EST, Monday - Friday.
ARTICLE #0616028 LUMINAIRE SUSPENDU Kichler® est une marque déposée de The L.D. Kichler Co. Tous droits réservés. MODÈLE #34720 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner le produit à votre détaillant, appelez notre service à la clientèle au 1-800-554-6504, entre 8 h et 16 h 30 (HNE) du lundi au vendredi.
CONTENU DE L’EMBALLAGE B A C D H I K L G N O M J F E Q P T S R U V PIÈCE DESCRIPTION QTÈ A Pavillon 1 Support de fixation B 1 C 1 Raccord fileté D 6 Écrou hexagonal 3 Ensemble de douilles E 1 F Raccord 1 G Tube fileté 1 H Bague de l'anneau du pavillon I Anneau de suspension du pavillon 1 1 J Tube fileté supérieur 1 K Chaîne PIÈCE DESCRIPTION QTÈ L Anneau de suspension du luminaire 1 1 Tube décoratif M 1 Raccord de tube N O 1 Bague du tube décoratif 1 P Tube fileté inférieur 1 Q Abat-jour interne
QUINCAILLERIE INCLUSE AA BB Capuchon de connexion Vis à Qté : 3 métaux courte Qté : 2 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : Coupez l’électricité avant TOUTE manipulation. • Accédez au panneau central de disjoncteurs ou de fusibles de votre demeure et placez l’interrupteur principal en position d’arrêt (« OFF »).
INSTRUCTIONS POUR L'ASSEMBLAGE 1. Vissez le tube fileté supérieur (J) dans le raccord (F). 1 J F 2. Abaissez le tube décoratif (M) et la bague du tube décoratif (O) par-dessus le tube fileté supérieur (J) et fixez à l’aide du raccord de tube (N). 2 N O M J 3 L G 3. Vissez le tube fileté (G) dans le raccord de tube (N). Vissez l’anneau de suspension du luminaire (L) dans le tube fileté (G).
INSTRUCTIONS POUR L'ASSEMBLAGE 4. Positionnez le raccord fileté (C) dans le support de fixation (B) de sorte que, une fois le montage effectué : • • • • Vissez le 1er écrou hexagonal (D) sur le raccord fileté (C) et serrez-le contre la partie saillante du support (B). Vissez le 2e écrou hexagonal (D) sur le raccord fileté (C) et serrez-le contre la partie plate du support de fixation (B).
INSTRUCTIONS POUR L'ASSEMBLAGE 7. À l'aide des anneaux ouverts de la chaîne (K), attachez une extrémité à l'anneau de suspension du pavillon (I) et l'autre extrémité à l'anneau de suspension du luminaire (L). Tressez le fil de terre et les fils électriques du luminaire à travers un maillon sur deux de la chaîne et faites-les passer à travers le raccord fileté (C) puis dans la boîte de sortie. Abaissez la bague de l’anneau du pavillon (H) et le pavillon (A) le long de la chaîne (K).
INSTRUCTIONS POUR L'ASSEMBLAGE 9. Faites passer le pavillon (A) sur l'anneau de suspension du pavillon (I). Attachez la bague de l’anneau du pavillon (H) à l'anneau de suspension du pavillon (I) pour fixer le pavillon (A). 9 A I H 10. Vissez le tube fileté inférieur (P) dans l’ensemble de douilles (E). 10 E P 11. Insérez trois ampoules à culot moyen de 60 watts max. (non fournies) dans l’ensemble de douilles (E). 11 E 12.
INSTRUCTIONS POUR L'ASSEMBLAGE 13. Faites passer le capuchon décoratif (U) sur le tube fileté inférieur (P) et fixez à l’aide du fleuron (V). 13 P U V ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif. N’utilisez jamais de nettoyants pour vitres; vous risqueriez d’endommager le fini métallique du luminaire.
GARANTIE Kichler Lighting garantit que ses produits seront libres de tout vice de fabrication ou défaut matériel pendant un (1) an à compter de la date d'achat par l'acheteur initial.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, appelez notre service à la clientèle au 1-800-554-6504, entre 8 h et 16 h 30 (HNE), du lundi au vendredi.
ARTÍCULO #0616028 Kichler® es una marca registrada de The L.D. Kichler Co. Todos los derechos reservados. LÁMPARA COLGANTE MODELO #34720 ADJUNTE SU RECIBO AQUÍ Número de serie Fecha de compra ¿Preguntas, problemas, piezas faltantes? Antes de devolverlo a la tienda, llame a nuestro departamento de servicio al cliente al 1-800-554-6504, de 8:00 a.m. a 4:30 p.m. hora del Este (EST), de lunes a viernes.
CONTENIDO DEL PAQUETE B A C D H I K L G N O M J F E Q P T S R U V PIEZA A B C D E F G H I J K DESCRIPCIÓN Cubierta Soporte de montaje Manguito roscado Tuerca hexagonal Conjunto de portalámparas Acoplamiento Tubo roscado Bucle de cuello roscado Anillo de cuello roscado Tubo roscado superior Cadena CANT 1 1 1 6 3 1 1 1 1 1 1 PIEZA L M N O P Q R S T U V 22 DESCRIPCIÓN Bucle para colgar la lámpara Tubo decorativo Acoplamiento del tubo Anillo decorativo del tubo Tubo roscado inferior Pantalla inte
ADITAMENTOS AA Conector de cables Cant.: 3 BB Tornillo corto para metales Cant.: 2 INFORMACIÓN DE SEGURIDAD Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto. • • • • • ADVERTENCIA IMPORTANTE: NUNCA intente hacer trabajos sin desconectar el suministro eléctrico. Coloque el interruptor de alimentación principal en la posición “OFF” (APAGADO). Coloque el interruptor de la pared en la posición “OFF” (APAGADO).
INSTRUCCIONES DE ENSAMBLAJE 1. Atornille el tubo roscado superior (J) al acoplamiento (F). 1 J F 2. Baje el tubo decorativo (M) y el anillo decorativo del tubo (O) sobre el tubo roscado superior (J) y asegúrelos con el acoplamiento de tubo (N). 2 N O M J 3 L G 3. Atornille el tubo roscado (G) al acoplamiento de tubo (N). Atornille el bucle de la lámpara (L) al tubo roscado (G).
INSTRUCCIONES DE ENSAMBLAJE 4. Coloque el manguito roscado (C) en el soporte de montaje (B), de manera que al quedar montado: • • • • B ¼ pulgada C El manguito roscado (C) sobresalga un mínimo de 6.35 mm (1/4 pulgada) encima de la porción central elevada del soporte (B). La altura del manguito roscado (C) esté colocada de manera que la mitad de las roscas exteriores del bucle de cuello roscado (I) sobresalga encima de la cubierta (A) cuando esté montada. 5.
INSTRUCCIONES DE ENSAMBLAJE 7. Usando los eslabones abiertos en la cadena (K), fije un extremo al bucle de cuello roscado (I) y el otro extremo al bucle de la lámpara (L). Entrelace los cables eléctricos y a tierra de la lámpara por los eslabones, uno sí y otro no, y páselos por el manguito roscado (C) a la caja eléctrica. Deslice el anillo de cuello roscado (H) y la cubierta (A) por la cadena (K). 7 I Caja de C salida K A H L 8.
INSTRUCCIONES DE ENSAMBLAJE 9. Pase la cubierta (A) sobre el bucle de cuello roscado (I). Fije el anillo de cuello roscado (H) al bucle de cuello roscado (I) para fijar la cubierta (A). 9 A I H 10. Atornille el tubo roscado inferior (P) al conjunto de portalámparas (E). 10 E P 11. Inserte tres focos de 60 W de base mediana (no se incluyen) en el conjunto de portalámparas (E). 12.
INSTRUCCIONES DE ENSAMBLAJE 13. Pase la tapa decorativa (U) sobre el tubo roscado inferior (P) y asegúrela con el remate (V). 13 P U V CUIDADO Y MANTENIMIENTO • Siempre asegúrese de que la corriente eléctrica esté desconectada antes de limpiar. • Utilice un paño húmedo suave y jabón suave no abrasivo para limpiar la lámpara. Nunca utilice un limpiador para vidrio en la lámpara, porque éste dañará el acabado metálico.
GARANTÍA Kichler Lighting garantiza que sus productos estarán libres de defectos de materiales o mano de obra por un (1) año a partir de la fecha de compra por el Comprador Original.
LISTA DE PIEZAS DE REPUESTO Para repuestos, llame a nuestro departamento de servicio al cliente al 1-800-554-6504, de 8:00 a.m. a 4:30 p.m. hora del Este (EST), de lunes a viernes.