Installation Guide

4
3. Position threaded nipple (C) in mounting bracket
(B) so that, when mounted:
• The threaded nipple (C) will protrude a
minimum of ¼ inch beyond the raised center
portion of the bracket (B).
• The threaded nipple (C) height should be
positioned so that ½ the exterior threads of
the screw collar loop (I) will extend past the
canopy (A), when it is mounted.
ASSEMBLY INSTRUCTIONS
1. Screw threaded pipe (G) onto coupling (F).
1
F
G
2. Pass threaded pipe (G) through spider (J) on
shade (N) and secure using fixture loop (L).
2
L
J
G
N
3
B
A
¼ Inch
I
C