ITEM #0616277 Kichler® is a registered trademark of The L.D. Kichler Co. All Rights Reserved. OUTDOOR HANGING LANTERN MODEL #39459 Français p. 10 Español p. 19 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-554-6504, 8 a.m. - 4:30 p.m, EST, Monday - Friday.
PACKAGE CONTENTS B A D H C I K L G E J F PART A B C D E F DESCRIPTION Canopy Mounting Bracket Threaded Nipple Hex Nut Socket 60-Watt Edison Bulb QTY 1 1 1 3 1 1 PART G H I J K L 2 DESCRIPTION Fixture Top Screw Collar Ring Screw Collar Loop Fixture Body Chain Fixture Loop QTY 1 1 1 1 1 1
HARDWARE CONTENTS AA Wire Connector Qty: 3 BB Short Machine Screw Qty: 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Place the main power switch in the “OFF” position and unscrew the fuse(s), or switch “OFF” the circuit breaker switch(es), that control the power to the fixture or room you are working in.
ASSEMBLY INSTRUCTIONS 1. Position threaded nipple (C) in mounting bracket (B) so that, when mounted: • • The threaded nipple (C) will protrude a minimum of ¼ inch beyond the raised center portion of the bracket (B). The threaded nipple (C) height should be positioned so that ½ the exterior threads of the screw collar loop (I) will extend past the canopy (A), when it is mounted. 2.
ASSEMBLY INSTRUCTIONS 3. Connect mounting bracket (B) to the outlet box with short machine screws (BB). 3 Outlet Box Hardware Used BB Short Machine Screw x2 B C BB 4. Using the open chain links on chain (K), attach one end to screw collar loop (I) and the other end to fixture loop (L). Weave the fixture electrical and ground wires through every other chain link and pass through threaded nipple (C) into outlet box. Lower the screw collar ring (H) and canopy (A) over the chain (K).
ASSEMBLY INSTRUCTIONS 5. Wire connection guide: Ground wire: • For installation in the United States: Wrap ground wire from outlet box around ground screw on mounting bracket (B) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). • For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around ground screw on mounting bracket (B). Tighten ground screw.
ASSEMBLY INSTRUCTIONS 7. Insert 60-watt max. Edison bulb (F) into socket (E). 7 E F CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. • All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher.
WARRANTY Kichler Lighting warrants that its products will be free from defects in material and workmanship for one (1) year from the date of purchase by the Original Purchaser. To replace a product that has a warranted defect, the Original Purchaser shall return any allegedly defective parts or products to the authorized Kichler distributor that the product was purchased from with PROOF OF PURCHASE, Original Purchaser’s name and return address and a description of the claimed product defect.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-800-554-6504, 8 a.m. - 4:30 p.m., EST, Monday - Friday. PART A B C D H I K AA BB DESCRIPTION Canopy Mounting Bracket Threaded Nipple Hex Nut Screw Collar Ring Screw Collar Loop Chain Wire Connector Short Machine Screw A B C PART # C39459 XBAR01 TN18200 NUT18 SCG-OZ SCL-OZ CHAIN-OZ WC001 SCR832X050 H D I K BB AA Printed in China Kichler® is a registered trademark of The L.D. Kichler Co.
ARTICLE #0616277 LANTERNE SUSPENDUE D'EXTÉRIEUR Kichler® est une marque déposée de The L.D. Kichler Co. Tous droits réservés. MODÈLE #39459 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner le produit à votre détaillant, appelez notre service à la clientèle au 1-800-554-6504, entre 8 h et 16 h 30 (HNE) du lundi au vendredi.
CONTENU DE L’EMBALLAGE B A D H C I K L G E J F PIÈCE A B C D E F DESCRIPTION Pavillon Support de fixation Raccord fileté Écrou hexagonal Douille Ampoule Edison de 60 watts QTÈ 1 1 1 3 1 1 PIÈCE DESCRIPTION QTÈ 1 Dessus du luminaire G H Bague de l'anneau du pavillon 1 I Anneau de suspension du pavillon 1 J 1 Corps du luminaire K Chaîne 1 L 1 Anneau de suspension du luminaire 11
QUINCAILLERIE INCLUSE AA Capuchon de connexion Qté : 3 BB Vis à métaux courte Qté : 2 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : Coupez l’électricité avant TOUTE manipulation. • Accédez au panneau central de disjoncteurs ou de fusibles de votre demeure et placez l’interrupteur principal en position d’arrêt (« OFF »).
INSTRUCTIONS POUR L'ASSEMBLAGE 1. Positionnez le raccord fileté (C) dans le support de fixation (B) de sorte que, une fois le montage effectué : • • 1 • • • Vissez le 1er écrou hexagonal (D) sur le raccord fileté (C) et serrez-le contre la partie saillante du support (B). Vissez le 2e écrou hexagonal (D) sur le raccord fileté (C) et serrez-le contre la partie plate du support de fixation (B).
INSTRUCTIONS POUR L'ASSEMBLAGE 3. Fixez le support de fixation (B) à la boîte de sortie à l'aide des vis à métaux courtes (BB). 3 Boîte de sortie Quincaillerie utilisée BB Vis à métaux courte x2 B C BB 4. À l'aide des anneaux ouverts de la chaîne (K), attachez une extrémité de la chaîne à l'anneau de suspension du pavillon (I) et l'autre extrémité à l'anneau de suspension du luminaire (L).
INSTRUCTIONS POUR L'ASSEMBLAGE 5.Guide de raccordement électrique 5 Fil de mise à la terre : • Pour une installation aux États-Unis : enroulez le fil de mise à la terre provenant de la boîte de sortie autour de la vis de mise à la terre située sur le support de fixation (B), à au moins 5,08 cm de l’extrémité du fil. Serrez la vis de mise à la terre. Si le luminaire est fourni avec un fil de mise à la terre, raccordez-le au fil de mise à la terre de la boîte de sortie à l’aide d’un connecteur de fils (AA).
INSTRUCTIONS POUR L'ASSEMBLAGE 7. Insérez une ampoule Edison de 60 watts max. (F) dans la douille (E). 7 E F ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif. N’utilisez jamais de nettoyants pour vitres; vous risqueriez d’endommager le fini métallique du luminaire. • Les abat-jour en verre peuvent être nettoyés dans un évier couvert de serviettes, à l’aide d’eau tiède et de savon doux.
GARANTIE Kichler Lighting garantit que ses produits seront libres de tout vice de fabrication ou défaut matériel pendant un (1) an à compter de la date d'achat par l'acheteur initial.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, appelez notre service à la clientèle au 1-800-554-6504, entre 8 h et 16 h 30 (HNE), du lundi au vendredi.
ARTÍCULO #0616277 Kichler® es una marca registrada de The L.D. Kichler Co. Todos los derechos reservados. FAROL DE COLGANTE PARA EXTERIORES MODELO #39459 ADJUNTE SU RECIBO AQUÍ Número de serie Fecha de compra ¿Preguntas, problemas, piezas faltantes? Antes de devolverlo a la tienda, llame a nuestro departamento de servicio al cliente al 1-800-554-6504, de 8:00 a.m. a 4:30 p.m. hora del Este (EST), de lunes a viernes.
CONTENIDO DEL PAQUETE B A D H C I K L G E J F PIEZA A B C D E F DESCRIPCIÓN Cubierta Soporte de montaje Manguito roscado Tuerca hexagonal Portalámparas Foco Edison de 60 W CANT 1 1 1 3 1 1 PIEZA G H I J K L 20 DESCRIPCIÓN Parte superior de la lámpara Anillo de cuello roscado Bucle de cuello roscado Cuerpo de la lámpara Cadena Bucle para colgar la lámpara CANT 1 1 1 1 1 1
ADITAMENTOS AA Conector de cables Cant.: 3 BB Tornillo corto para metales Cant.: 2 INFORMACIÓN DE SEGURIDAD Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto. • • • • • ADVERTENCIA IMPORTANTE: NUNCA intente hacer trabajos sin desconectar el suministro eléctrico. Coloque el interruptor de alimentación principal en la posición “OFF” (APAGADO). Coloque el interruptor de la pared en la posición “OFF” (APAGADO).
INSTRUCCIONES DE ENSAMBLAJE 1. Coloque el manguito roscado (C) en el soporte de montaje (B), de manera que al quedar montado: • El manguito roscado (C) sobresalga un mínimo de 6.35 mm (1/4") encima de la porción central elevada del soporte (B). • La altura del manguito roscado (C) esté colocada de manera que la mitad de las roscas exteriores del bucle de cuello roscado (I) sobresalga encima de la cubierta (A) cuando esté montada. 1 2.
INSTRUCCIONES DE ENSAMBLAJE 3. Conecte el soporte de montaje (B) a la caja eléctrica con tornillos cortos para metal (BB). 3 Caja de salida Aditamentos utilizados BB Tornillo corto para metales x2 B C BB 4. Usando los eslabones abiertos en la cadena (K), fije un extremo al bucle de cuello roscado (I) y el otro extremo al bucle de la lámpara (L). Entrelace los cables eléctricos y a tierra de la lámpara por los eslabones, uno sí y otro no, y páselos por el manguito roscado (C) a la caja eléctrica.
INSTRUCCIONES DE ENSAMBLAJE 5.Guía de conexión de cables: 5 Cable a tierra: • Para la instalación en los Estados Unidos: Enrolle el cable a tierra de la caja eléctrica alrededor del tornillo a tierra en la abrazadera de montaje (B), a no menos de 5 cm (2") del extremo del cable. Apriete el tornillo a tierra. Si la lámpara viene con un cable a tierra, conéctelo al cable a tierra de la caja eléctrica con un conector de cables (AA).
INSTRUCCIONES DE ENSAMBLAJE 7. Inserte un foco Edison de máximo 60 W (F) en el portalámparas (E). 7 E F CUIDADO Y MANTENIMIENTO • Siempre asegúrese de que la corriente eléctrica esté desconectada antes de limpiar. • Utilice un paño húmedo suave y jabón suave no abrasivo para limpiar la lámpara. Nunca utilice un limpiador para vidrio en la lámpara, porque éste dañará el acabado metálico. • Las pantallas de vidrio se pueden lavar dentro de un lavabo recubierto con toallas usando agua tibia y jabón suave.
GARANTÍA Kichler Lighting garantiza que sus productos estarán libres de defectos de materiales o mano de obra por un (1) año a partir de la fecha de compra por el Comprador Original.
LISTA DE PIEZAS DE REPUESTO Para repuestos, llame a nuestro departamento de servicio al cliente al 1-800-554-6504, de 8:00 a.m. a 4:30 p.m. hora del Este (EST), de lunes a viernes.