Installation Guide
SAFETY INSTRUCTIONS
READ THIS FIRST
KEEP THESE INSTRUCTIONS
This xture is intended for installation in accordance with the National
Electric Code (NEC) and Local code specications. Failure to adhere to
these codes and instructions may result in serious injury and/or property
damage and will void the warranty.
WARNING – RISK OF ELECTRIC SHOCK
• Donotmountluminairewithin10feet(3m)ofaswimmingpool,spaor
fountain.
• ThisxtureistobeusedonlywithaKichler
®
lowvoltagelightingpower
unit(transformer)ratedamaximum15volts,300Wpersecondary(25AMPS)
NOTE: IfadditionalDirectBurialwireisneeded,contactyourlocalKichler
®
landscapedistributor.
•8GAwirecanbepurchasedinlengthof250’(76M),15503-BK.
•10GAwirecanbepurchasedinlengthof250’(76M),15504-BK.
•12GAwirecanbepurchasedinlengthsof100’(30M),15501-BK;250’
(76M),15502-BK;500’(152M),15505-BK;and1000’(304M),15506-BK.
DateIssued:1/13/12 IS-16030-US
For warranty information please visit: http://www.landscapelighting.com/portal/warranty_page
Para informacion de la garantia por favor visite: www.landscapelighting.com/portal/warranty_page
SPHERE
RETAINING
SCREWS
TORNILLOSDE
RETENCIÓNDE
LAESFERA
GLASS
SEALINGRING
ANILLO
OBTURADOR
DEVIDRIO
GLASS
VIDRIO
GASKET
JUNTA
SPHERE
ESFERA
THREADEDSTAKE
ESTACAROSCADA
FIXTURE ASSEMBLY AND INSTALLATION
1. Turnoffpower.
2. Determineddesiredlocationofxtureanddighole.Holeshouldbe9"
(diameter)x6"(deep)ifworkinginsoftsoil,suchassand.Ifworkingin
hardorcompactedsoil,suchasclay,diga9"(diameter)x10"(deep)hole.
3. If installing in soft soil:Usethethreadedstaketodigintotheground
andtemporarilystabilizethexture.
If installing in hard soil:Fillthebottomoftheholewithapproximately3"
(76mm)ofpeagravel.Placethextureinholeandbackllaroundthe
xturewithsoil,uptothewireexithole.
4. MakewireconnectionsusingsuppliedQuicDisc™followingtheinstructions
below,orusingotherapprovedwiringconnectionmethod(notsupplied.)
Thexturewireisnotintendedfordirectburial.Accordingtotherequirements
oftheNationalElectricCode(NEC),directburialratedwireistobeburied
aminimumof6"[152mm]beneaththesurfaceoftheground.
5. To aim the beam:Removetheglasssealantringbyremovingthesix(6)
screwsontopofthexture.Loosenthescrewsonthesphereretaining
ringuntilthespherebecomesunxed.Aimthebeamasdesired.(upto
15°)Re-tightenthescrewsonthesphereretainingringuntilthesphereis
secureanddoesnotrotate.Cleansealingsurface,andreplaceglass,
gasket,andglasssealingring.Installandtorquescrewsintriangular
pattern,followingthenumbersscrewsholes1-6.
6. Backllaroundthexturewithsoil.
SOIL
SUELO
FOR INSTALLATION IN SOFT SOILPARA
INSTALACIÓN EN SUELOS BLANDOS
SOIL
SUELO
FOR INSTALLATION IN HARD SOIL
PARA INSTALACIÓN EN SUELOS DUROS
3"(76MM)
OFPEAGRAVEL
3”(76MM)DE
GRAVADERÍO
START
INICIO
TIGHTEN SCREWS IN TRIANGULAR PATTERN SHOWN ABOVE.
AJUSTE LOS TORNILLOS EN FORMA TRIANGULAR TAL COMO SE
MUESTRA ANTERIORMENTE.
QUIC DISC
™
WIRING INSTRUCTIONS
Turnoffpower.
Thefulllengthofthe18GAxturewiremaybeusedtoconnectwiththe10GAor12GAcableprovidedthefollowingconditionsaremet:
•Wiringistobeprotectedbyroutingclosetothextureoraccessoryorsecuredtoabuildingstructuresuchashouseordeck.
• 18GAxturewiringistobecutoffsothatitisattachedtotheconnectorwithin6inchesofthextureorbuildingstructure.
• Ifitisnecessarytomaketheconnectionsunderground,thennomorethan6inchesofthe18GAxturewireistobeburied.
TheQuicDisc
™
connectorisdesignedtoinstallonextureandaccommodatesone18GAxturewireandone10GAorone12GAsupplywire.
Placethe10gaugesupplywireacrosstheareamarked10GAonQuicDisc
™
orplacethe12gaugesupplywireacrosstheareamarked12GA
onQuicDisc
™
.
Placethe18gaugexturewireacrosstheareamarked18GAontheQuicDisc
™
.Afterthewiresareinplace,connectathetopoftheQuic
Disc
™
tothebasewithsuppliedscrew,makingsurethatthewiresremainatinthebottomportionoftheQuicDisc
™
,andthescrewistightened
allthewaydown.
Thecoppercontactswillautomaticallypiercethewires’insulation.Excess18GAxturewirethatsticksouttheendoftheQuicDisc
™
istobecutoff.
Makenootherwiringconnectionstothe18GAxturewire.