Installation Guide

ATTACHING THE FAN MOTOR
ASSEMBLY TO THE HANGER BRACKET
Fig. 10
Hanger bracket
J hook
Screw
Fan motor assemby
Mounting plate
Step 1. Remove one of the four screws on the hanger bracket and
loosen,butdonotremove,theotherthreescrews.
Step2.RemovethemotorassemblyfromtheJhook.
Step3.Liftandplacethekeyholesonthemountingplateoverthethree
screws previously loosened on the hanger bracket and turn the
mountingplateuntilitlocksinplaceandnolongerturns.
Step4.Securebytighteningthethreescrewspreviouslyloosenedand
thescrewpreviouslyremoved.