Installation Guide

REMEMBER toturnoffthepower.Followthe
stepsbelowtohangyourfanproperly:
Step1.Passthe120-voltsupplywiresthrough
thecenterholeintheceilinghangerbracketas
showninFig.5.
Step 2. Secure the hanger bracket to the
ceilingoutletboxwiththescrewsandwashers
providedwithyouroutletbox.
Step3.Liftthefanintopositionbyhangingthe
mounting plate portion of the fan motor
assembly onto the J hook from the ceiling
hangerbracketallowingittohangfreely.
Fig. 5
Mounting screws
Hanger bracket
(supplied with
electrical box)
CUL Listed
electrial
box
120V Wires
Washers
Fig. 6
Hanger bracket
Fan motor assembly
mounting plate
J hook
48 VOLOS