Installation Guide

Fig. 8

White (neutral)

Green or bare

copper (ground)

Outlet box

Black (hot)

Black (motor)

Ground

(green)

(Connect to

ground wire on

hanger bracket

if no house

ground wire

exists.)

MAKE THE ELECTRIC

CONNECTIONS

WARNING:To avoid possible electricalshock,besureelectricity

isturnedoﬀat themainfuseboxbeforewiring.

Step 2. (Figure 8) If your outlet box has a ground wire (green or bare

copper) connect it to the fan ground wires; otherwise, connect the

hangingbracketgroundwiretothemountingplategroundwire.Secure

thewireconnectionwithaplasticnutprovided.Afterconnectingthe

wires,spreadthemapartsothatthegreenandwhitewiresareonone

sideoftheoutletboxand black and bluewiresareontheotherside.

Carefullytuckthewireconnectionsupintotheoutletbox.

Step1.(Fig.8)MotortoHouseSupplyWiresElectricalConnections:

ConnecttheBlackwirefromthefantotheblack(hot)wirefromthe

ceiling.ConnecttheWhitewirefromthefantothewhite(neutral)

wirefromtheceiling.Securewireconnectionswiththeplasticwire

nutsprovided.